Search found 180 matches

by aboutton
Sat Jan 05, 2019 6:47 am
Forum: Bosch
Topic: BMW E46 M3 MSS54 XDF file needed
Replies: 15
Views: 7571

for all xdf request for S54 to tune your file it takes 5 min of my time but to create an xdf for your bin file it takes 30 min.

honestly i dont have 30 min to spare, so send me your file to my email and i will tune it for free.

got the point ?
by aboutton
Sat Jan 05, 2019 6:42 am
Forum: Bosch
Topic: E36 402
Replies: 15
Views: 1221

and for your question about launch control for 413.
The bin you have is 506 not 413 just use xdf for 506 and change first value of the rev limit map to match your rev limit and launch is disabled
by aboutton
Sat Jan 05, 2019 6:39 am
Forum: Bosch
Topic: research bmw bosch ecu 0 261 200 402
Replies: 6
Views: 771

sent by mail
by aboutton
Sat Jan 05, 2019 6:32 am
Forum: Bosch
Topic: E36 402
Replies: 15
Views: 1221

jiust change the value of the last 2 cells of the idle ignition to 0 value hex
and lean the idle fuel in the same cells and you will get some pop sound
by aboutton
Mon Apr 09, 2018 12:00 pm
Forum: Bosch
Topic: M3.3.1 506 Injector scaling
Replies: 4
Views: 2341

you must use a larger housing for the maf or the maf will maxout quickly
buying a HPX maf is the best choice

Mohamed Ramli i sent you the XDF and the bin to your email and sorry again for the later reply, Drift season has started. :lol:
by aboutton
Mon Apr 09, 2018 11:56 am
Forum: Bosch
Topic: m50 DME 402 red label search XDF
Replies: 2
Views: 1674

sent
enjoy
by aboutton
Wed Apr 04, 2018 10:01 am
Forum: Bosch
Topic: M3.3.1 506 Injector scaling
Replies: 4
Views: 2341

what MAF are you using ?
injectors size ?
Fuel pressure ?
by aboutton
Wed Apr 04, 2018 9:53 am
Forum: Bosch
Topic: DME 403 SOFT 950 XDF
Replies: 10
Views: 3668

Nice work bro 8)
by aboutton
Wed Apr 04, 2018 9:44 am
Forum: Bosch
Topic: Bosch BMW 0 261 200 402 ECU XDF file
Replies: 10
Views: 6161

send me an email
by aboutton
Wed Apr 04, 2018 9:40 am
Forum: Bosch
Topic: 403,405 xdf
Replies: 1
Views: 1556

sent to your email for free
we are here to help not to make money
by aboutton
Fri Feb 23, 2018 9:52 pm
Forum: Bosch
Topic: BMW E46 M3 MSS54 XDF file needed
Replies: 15
Views: 7571

Please guys lets make something clear. S54 ECU is not similar to Bosch ECUs with a removable eprom so you cannot change the software version easily. What i want to explain is that every software version needs a different XDF file And no way i can create XDF for every request. Easier solution is to s...
by aboutton
Sun Feb 11, 2018 6:44 am
Forum: Bosch
Topic: Looking for a base tune M50 turbo 143 silver label
Replies: 2
Views: 1971

send me your email
by aboutton
Mon Sep 11, 2017 10:25 am
Forum: Bosch
Topic: BMW E46 M3 MSS54 XDF file needed
Replies: 15
Views: 7571

send the file
by aboutton
Mon Sep 04, 2017 9:07 am
Forum: Bosch
Topic: BMW E46 M3 MSS54 XDF file needed
Replies: 15
Views: 7571

sent to your inbox
by aboutton
Fri Sep 01, 2017 6:55 am
Forum: Bosch
Topic: BMW E46 M3 MSS54 XDF file needed
Replies: 15
Views: 7571

send me the bin file and i will send you the xdf for your car
by aboutton
Thu Aug 31, 2017 7:02 am
Forum: Bosch
Topic: BMW M50 413 tuning with ITB
Replies: 19
Views: 9539

you dont have Limp mode map ?
by aboutton
Wed Aug 30, 2017 11:38 pm
Forum: Bosch
Topic: BMW M50 413 tuning with ITB
Replies: 19
Views: 9539

where did you get the xdf from ?
by aboutton
Wed Aug 30, 2017 10:18 am
Forum: Bosch
Topic: BMW M50 413 tuning with ITB
Replies: 19
Views: 9539

The limp mode map is located at 0xDBC3 6x7 (alfa_n MAP)
by aboutton
Tue Aug 29, 2017 6:07 am
Forum: Bosch
Topic: BMW M50 413 tuning with ITB
Replies: 19
Views: 9539

what software number you are using ?
by aboutton
Mon Aug 28, 2017 3:29 pm
Forum: Bosch
Topic: BMW M50 413 tuning with ITB
Replies: 19
Views: 9539

yeah sure you will not get any power of that ecu without speed sensor connected but it will not cut on 5500.
by aboutton
Mon Aug 28, 2017 12:02 am
Forum: Bosch
Topic: Bosch BMW 0 261 200 402 ECU XDF file
Replies: 10
Views: 6161

8) enjoy
by aboutton
Mon Aug 28, 2017 12:01 am
Forum: Bosch
Topic: Extend tables size
Replies: 26
Views: 13154

ill do it tonight and post results tomorrow
by aboutton
Mon Aug 28, 2017 12:00 am
Forum: Bosch
Topic: BMW M50 413 tuning with ITB
Replies: 19
Views: 9539

the speed signal is essential for the DME413 to work correctly but there is no limiter at 5500 rpm. you have another problem causing the cut at 5500 100% sure
by aboutton
Sun Aug 27, 2017 11:56 pm
Forum: Bosch
Topic: Extend tables size
Replies: 26
Views: 13154

i will try to do it and test
what DME number are you working on ?
by aboutton
Sat Aug 26, 2017 11:04 pm
Forum: Bosch
Topic: Extend tables size
Replies: 26
Views: 13154

I think Hakkent can help you more with this cz he did it before on the 173 ecu
by aboutton
Sat Aug 26, 2017 10:56 pm
Forum: Bosch
Topic: Tuning Help needed
Replies: 35
Views: 14088

i don't think anyone can help with what you are doing without having the car in front of him and ostrich connected.

it has to be done in live tuning.
by aboutton
Wed Aug 23, 2017 3:00 am
Forum: Bosch
Topic: E46 M3 xdf file
Replies: 3
Views: 2774

i use winols for e46 m3.
if you need help let me know
by aboutton
Sun Aug 20, 2017 12:49 pm
Forum: TunerPro Discussion
Topic: Toggle hit address tracing
Replies: 1
Views: 2266

Hardware problem
it happened to me before i had to buy a new ostrich
by aboutton
Sun Aug 20, 2017 12:46 pm
Forum: Bosch
Topic: Bosch BMW 0 261 200 402 ECU XDF file
Replies: 10
Views: 6161

pm me your email
by aboutton
Thu Jul 27, 2017 8:17 am
Forum: Bosch
Topic: Tuning Help needed
Replies: 35
Views: 14088

what about the camshaft position sensor ?
by aboutton
Tue Jul 25, 2017 9:01 pm
Forum: Bosch
Topic: Tuning Help needed
Replies: 35
Views: 14088

can you give more explanation ?

what exactly are you doing ?
by aboutton
Tue Jul 25, 2017 8:55 pm
Forum: Bosch
Topic: Alpha n/ itb's on m50b25/dme 403
Replies: 43
Views: 17602

1- Did you make sure that the TPS voltage is ascending not descending when you step the throttle ? cause on M50 with M3 throttle bodies it will be flipped so you need to flip the positive and negative wires together to fix that issue. 2- Its true that the AlfaN table is 6 x 7 but it is not a fuel ta...
by aboutton
Thu Jul 20, 2017 1:53 pm
Forum: Bosch
Topic: DME 0 261 200 400 XDF file exists?
Replies: 4
Views: 3617

403 and 402 xdf are similar but need to be adapted before using the xdf.
i never charge money for anything i post here but we are in the race season now and really dont have time to do it now.

can you wait couple of weeks ? ill post the xdf
by aboutton
Thu Jul 20, 2017 1:48 pm
Forum: Bosch
Topic: Searching for XDF 0261200172 and 0261204620
Replies: 6
Views: 4369

use 173 bin with 173 xdf in 172 DME

both ECU are identical
by aboutton
Thu Jul 20, 2017 1:44 pm
Forum: Bosch
Topic: Alpha n/ itb's on m50b25/dme 403
Replies: 43
Views: 17602

0x6F84 - 4 X 6 Acceleration Enrichment

enjoy
by aboutton
Wed Apr 05, 2017 11:49 am
Forum: Bosch
Topic: stock chip for 413/m52
Replies: 9
Views: 9812

soo freak'n busy lately.

anyone still need help ?
by aboutton
Mon Dec 19, 2016 11:27 pm
Forum: Bosch
Topic: xdf file for 0 261 200 011
Replies: 7
Views: 5936

this is not a motronic ecu
this bnw engine has a normal distributor for ignition and the ecu is only for fuel and rev limiter.
i think i have the xdf somewhere ill take a look for you tonight
by aboutton
Mon Dec 19, 2016 11:23 pm
Forum: Bosch
Topic: bmw m20b25 DME173 XDF rpm axis change/increase
Replies: 1
Views: 2482

use hakkent xdf
by aboutton
Thu Sep 22, 2016 2:28 pm
Forum: Bosch
Topic: Help to check that I'm using the correct BMW 413/506 XDF
Replies: 1
Views: 3271

send your bins if you still dont have answers
by aboutton
Thu Sep 22, 2016 2:24 pm
Forum: Bosch
Topic: Which Definition file for 402 dme?
Replies: 1
Views: 2816

send me the file
by aboutton
Thu Sep 22, 2016 2:23 pm
Forum: Bosch
Topic: search full xdf for motronic 3.1 bmw
Replies: 2
Views: 3348

what do you need exactly ?
by aboutton
Thu Sep 22, 2016 2:22 pm
Forum: Bosch
Topic: Importing from Miller WAR
Replies: 3
Views: 4295

You can try to read the miller chip using a normal eeprom reader it wont damage anything. The eeprom reader reads the chip in sequential manner and what the eprom protection board do is that it wont let you read the data from the chip if it finds out that you are reading data in sequential and not i...
by aboutton
Thu Sep 22, 2016 1:57 pm
Forum: Bosch
Topic: 413 red label non vanos afr is (- - -) 19.0+
Replies: 6
Views: 5472

Normal aspirated engine AFR :
IDLE 14.7
Cruising 13 to 13.5
Full Throttle 12.5 to 13

Boosted Engines
Idle 14.7
without boost 13 to 13.5
With boost 11.5 to 12 ( to be safe keep it under 12.5 )
by aboutton
Thu Sep 22, 2016 1:41 pm
Forum: Bosch
Topic: Tuning Bosch M5.2.1. Anyone?
Replies: 1
Views: 2696

what do you need ?

i have tuned this ecu before but not with tunerpro so i dont have a proper XDF for it, if you only need a tune i can send you one for free but if you are looking to tune it yourself !!! it will be hard good luck.
by aboutton
Thu Sep 22, 2016 1:35 pm
Forum: Bosch
Topic: I am looking xdf file for Bosch motronic
Replies: 2
Views: 3963

your ECU Info is :
Hardware number 0261200200
Software number 1 267356275
DME MP3.1

Never seen this number before.
can you please provide more info about your car and engine ?
by aboutton
Thu Sep 22, 2016 1:22 pm
Forum: Bosch
Topic: 403 dme live tracing adx file
Replies: 3
Views: 3430

sent to your email.
by aboutton
Thu Sep 22, 2016 1:21 pm
Forum: Bosch
Topic: 402 raise rev limit
Replies: 1
Views: 2605

send me to my email the bin file you want to use and the RPM values and ill do it for you.

You need to change the values in the bin file and if you are not familiar with HEX code, you better let the experts do it .
by aboutton
Wed Apr 13, 2016 4:48 am
Forum: Bosch
Topic: 700hp E36 M3 413 Red lable XDF
Replies: 7
Views: 6966

the bin file you sent me is not a valid 413 bin file.

if the chip from 413 red ecu has an electronic board between it and the ecu that means it is encrypted and cannot be nor read nor modified nor used without the decryption board.
by aboutton
Sun Apr 10, 2016 11:17 am
Forum: Bosch
Topic: Beginner help - BMW DME 405
Replies: 6
Views: 6501

contact me by email i'll help you
by aboutton
Sun Apr 10, 2016 11:13 am
Forum: Bosch
Topic: Looking for solution
Replies: 2
Views: 4186

DME950 and DME960 XDF are posted in the download section.