Search found 15 matches

by rts91tsi
Mon Jan 21, 2013 4:26 pm
Forum: Feature Suggestions
Topic: Adding Bitmasks to Data Association
Replies: 7
Views: 13543

Figured I would post an update as to the progress, and slight setback I've encountered while trying to get this to work correctly. First, I changed the row labeling for the XDF to a single floating point value per row to avoid a conflict with the string data which I was previously using. Then I defi...
by rts91tsi
Wed Jan 16, 2013 4:44 pm
Forum: Feature Suggestions
Topic: Adding Bitmasks to Data Association
Replies: 7
Views: 13543

Thank you again for the advice! The bits I'm concerned with are: 0x01(4th gear) 0x02(3rd gear) 0x04(2nd gear) 0x08(1st gear) I should be able to sort this out thanks to your advice which I much appreciate. Also, please feel free to move this thread topic if you feel it better suites a different sect...
by rts91tsi
Tue Jan 15, 2013 4:35 pm
Forum: Feature Suggestions
Topic: Adding Bitmasks to Data Association
Replies: 7
Views: 13543

I was just thinking as I was about to apply your suggestion that in order for this to work as I was hoping that I will need to associate all four gear bits into one value for the Y axis. I've included a picture of one of the tables that is dependent on all four gear bits, which has Power/ECO mode bu...
by rts91tsi
Tue Jan 15, 2013 3:53 pm
Forum: Feature Suggestions
Topic: Adding Bitmasks to Data Association
Replies: 7
Views: 13543

The Bitwise Operation for the 'Current Gear Bit' is configured as a Bitwise AND, which displays the current gear when true, or 1. :oops: I wasn't sure if there was another way to make this work how I was intending, but I'm relatively new to the software, and I know there are probably a few things th...
by rts91tsi
Tue Jan 15, 2013 12:39 pm
Forum: Feature Suggestions
Topic: Adding Bitmasks to Data Association
Replies: 7
Views: 13543

Adding Bitmasks to Data Association

Forgive me if this has been asked as a feature request before (searched, but couldn't find any related info), or if it isn't a possibility, but I was curious if it would be possible to add 'Bitmasks' for Data Association. The 1g DSM TCU XDF I've been working on has a few very important tables that d...
by rts91tsi
Thu Jan 10, 2013 1:13 pm
Forum: Report A Bug
Topic: TunerProRT v5 sporadic bad data
Replies: 25
Views: 43244

Nicely done. Will you be willing to share these files for the TunerPro site and the community at large? I too was having an issue with funky data, and errors on the TCU ADX that I've been working on for 1g DSM's. ...to put the finishing touches on the XDF too. :) Yes Sir, I'm more than willing to s...
by rts91tsi
Thu Jan 10, 2013 12:43 pm
Forum: Report A Bug
Topic: TunerProRT v5 sporadic bad data
Replies: 25
Views: 43244

I too was having an issue with funky data, and errors on the TCU ADX that I've been working on for 1g DSM's. I ended up adding a 'Listen for Silence' to be used as a pause after each send/listen command per data item at a time interval of 20ms as shown in the screenshots that robertisaar posted (BTW...
by rts91tsi
Thu Jun 14, 2012 3:20 am
Forum: TunerPro Discussion
Topic: Factor/Offset for WBo2 input
Replies: 7
Views: 7839

The AEM white papers, which may or may not be correct from what I've read, list the full scale voltage of the sensor to be 4.99v, basically 5v. The papers also list the AFR scale from 10-19.98 for gasoline, basically an AFR range of 10. Additionally, the ECU will interpret the voltage it sees as 0-2...
by rts91tsi
Wed Dec 21, 2011 5:49 am
Forum: TunerPro Discussion
Topic: EFI Test Bench
Replies: 14
Views: 12864

Pretty nice setup you have there! It is awesome that such a tool exists and can facilitate a wide array of platforms, as well as its ability to aid in building custom setups! I definitely have the necessary spare connectors and such, and even have a spare ECU case for an enclosure. More than likely,...
by rts91tsi
Tue Dec 20, 2011 12:12 pm
Forum: TunerPro Discussion
Topic: EFI Test Bench
Replies: 14
Views: 12864

EagleMark wrote:WOW!! :D

You sir are haveing to much fun! Thanks for the information I am ordering a JimStim model.
I agree! This is the type of simulator I have been searching for to make a test bench setup. Thanks!
by rts91tsi
Fri Dec 16, 2011 5:33 am
Forum: DSM
Topic: Need bin and xdf for 1.6 4g92 SOHC mirage 5g (1995)
Replies: 8
Views: 15387

I think your best chance of finding the bin you need would be to e-mail the guy who says he has it, post to the topic message from the link, or a new one. If you're lucky, he may have a matching xdf too. http://autos.groups.yahoo.com/group/dsm-ecu/message/8067 Do you still have the original ROM chi...
by rts91tsi
Thu Dec 15, 2011 3:23 am
Forum: DSM
Topic: Need bin and xdf for 1.6 4g92 SOHC mirage 5g (1995)
Replies: 8
Views: 15387

I think your best chance of finding the bin you need would be to e-mail the guy who says he has it, post to the topic message from the link, or a new one. If you're lucky, he may have a matching xdf too. http://autos.groups.yahoo.com/group/dsm-ecu/message/8067 Do you still have the original ROM chip...
by rts91tsi
Wed Dec 14, 2011 7:32 am
Forum: DSM
Topic: Need bin and xdf for 1.6 4g92 SOHC mirage 5g (1995)
Replies: 8
Views: 15387

It looks as though the ECU you have is interchangeable with the ECU from the second link I provided. I found that info from a German Colt Forum. http://translate.google.com/translate?hl=en&sl=de&u=http://www.coltmania.de/viewtopic.php%3Ff%3D12%26t%3D48862&ei=I8noTtWhCern0QGPpvX9CQ&sa=X&oi=translate&...
by rts91tsi
Tue Dec 13, 2011 3:49 pm
Forum: DSM
Topic: Need bin and xdf for 1.6 4g92 SOHC mirage 5g (1995)
Replies: 8
Views: 15387

I'm not sure what rom image you need, but have you tried looking in the files section, under "Other Code Images" on the DSM-ECU Yahoo Group? If you're not a member you won't be able to view the files or post, so sign up if not. http://autos.groups.yahoo.com/group/dsm-ecu/ Also search the messages fo...
by rts91tsi
Sat Dec 03, 2011 5:58 am
Forum: DSM
Topic: IG DSM Need Some HELP
Replies: 2
Views: 7287

What version of the ALDL logging cable do you have, PC or Palm? The only difference between the two cables is how the receive and transmit are connected. On the palm cable, P2 is transmit, P3 is receive, and P5 is ground. On the laptop version, P2 is receive, P3 is transmit, and P5 is ground. Here i...