Search found 25 matches

by festy
Mon Apr 02, 2018 2:07 pm
Forum: Report A Bug
Topic: scanning live data
Replies: 6
Views: 3526

Same issue here, I've tried a few different ADX files that have always worked, but getting blank list view (all other views are fine). One thing I noticed - if you scroll the list up or down quickly, a black/green/red dot briefly appears where the data should be. I tried removing TunerProSettings.da...
by festy
Wed Apr 06, 2016 5:54 pm
Forum: TunerPro Discussion
Topic: Internal Format of XDL files
Replies: 16
Views: 24651

I don't believe there are any plans to publish the XDL format, but regardless of whether or not it remains the primary log format used by Tuner Pro I think it's safe to assume it will continue to be supported in it's current form for the foreseeable future.
by festy
Tue Jul 22, 2014 2:11 pm
Forum: Bosch
Topic: tryin to create tunerpro definition
Replies: 6
Views: 8379

I've had a very quick look at the code, and I think the MAF maps might be at 0xB100 (256x1) and 0xB000 (256x1). These values are read during the ADC interrupt routine and then used as factors in a multiplication function, it's certainly not a temperature sensor calculation so guess it's probably the...
by festy
Sun Jun 29, 2014 11:50 pm
Forum: TunerPro Discussion
Topic: Internal Format of XDL files
Replies: 16
Views: 24651

The problem with doing it that way is that an hour long log would then take an hour to transfer to TP :cry: The XDL format is pretty much just a timestamp plus the data returned by the ECU anyway - if you compare a hex dump of an xdl file with it's csv export, you should be able to spot the record s...
by festy
Sat Jun 28, 2014 5:29 pm
Forum: TunerPro Discussion
Topic: Cosworth weber marelli L8 ECU IAW4 problem
Replies: 3
Views: 5677

Sounds like a checksum issue - once the ECU is running you can make changes, but on next startup the checksum fails unless you revert to an original bin.
by festy
Sat Jun 28, 2014 5:27 pm
Forum: Bosch
Topic: tryin to create tunerpro definition
Replies: 6
Views: 8379

I've done a bit more work on the xdf here - set the xdf view to 'parameter category'.
Use at your own risk etc, I've tried to work out the most important maps but some are little more than an educated guess.
by festy
Mon Jun 23, 2014 7:15 pm
Forum: Bosch
Topic: tryin to create tunerpro definition
Replies: 6
Views: 8379

Try this: <XDFTABLE uniqueid="0xC0CA" flags="0x0"> <title>0xC0CA 12x6 RPM Load </title> <CATEGORYMEM index="0" category="1" /> <XDFAXIS id="x" uniqueid="0x0"> <EMBEDDEDDATA mmedelementsizebits="8" mmedmajorstridebits="-32" mmedminorstridebits="0" /> <units>RPM</units> <indexcount>12</indexcount> <ou...
by festy
Fri Jun 20, 2014 10:22 pm
Forum: TunerPro Discussion
Topic: Internal Format of XDL files
Replies: 16
Views: 24651

I imagine the only concern would if the .XDL format changes in future Tunerpro revisions, it might breaking outside software. Exactly correct. I can share the details with you, but I'm about 90% of the way done with replacing the entire logging system with a new, custom database-like implementation...
by festy
Thu Sep 19, 2013 12:09 am
Forum: Bosch
Topic: Motronic 1.8 XDF creation
Replies: 5
Views: 8268

The RT version is required - it's an RT plug-in. When it's used with a specially modified Motronic ECU and bin file, it can do real-time ECU tuning - not just download bins. That information you found looks like a good start - it shows the location of the maps, their size and axis contents (assuming...
by festy
Sun Sep 15, 2013 12:48 am
Forum: Report A Bug
Topic: High CPU during log playback
Replies: 5
Views: 9995

I can trigger this by switching to the item list view if I moved the time range slider on the Monitor window prior to switching views. Moving the slider doesn't immediately cause a problem by itself though. And it's not just high CPU, TP immediately becomes unresponsive and doesn't recover. Problem ...
by festy
Thu Sep 12, 2013 8:07 pm
Forum: Report A Bug
Topic: High CPU during log playback
Replies: 5
Views: 9995

That would explain it!

Edit - 8202 looks great, thanks 8)
by festy
Thu Sep 12, 2013 6:00 pm
Forum: Report A Bug
Topic: High CPU during log playback
Replies: 5
Views: 9995

High CPU during log playback

Playing back logs in the latest Tuner Pro RT build seems to hog the CPU, consuming 100% of a core for the duration of playback.
I've tried multiple logs created with different ADXs and it's the same with all of them.

Win7 x64 dual core, Tuner Pro RT build 5.00.8200.00

Is it just me?...
by festy
Tue Sep 10, 2013 6:59 pm
Forum: Bosch
Topic: Motronic 1.8 XDF creation
Replies: 5
Views: 8268

You should be able to read the bin off that ECU using a $10 KKL cable and this motronic plug-in for tuner pro RT I've been working on. I think it's been tested on a volvo M1.8 ECU already. The bin download can take anywhere from 10-30 minutes. If you get the bin downloaded, I can make a very basic x...
by festy
Mon Apr 29, 2013 3:07 pm
Forum: Bosch
Topic: Can this be done?
Replies: 4
Views: 6182

Fitting the TS engine would avoid most of the potential problems with using the M1.7, and the immobilizer can be disabled if you don't want to fit the code box etc. If you really wanted to FI your original 1.6 engine though, an older Alfa Motronic ECU like the 0.261.200.124 from a 75 1.6/1.8 IE woul...
by festy
Sat Apr 27, 2013 9:13 pm
Forum: Bosch
Topic: Can this be done?
Replies: 4
Views: 6182

The M1.7 wouldn't be the easiest ECU to do this with, but it's certainly possible. I've been working on the Alfa Motronic ECUs for a while now and although I've got a basic XDF together for the 155 TS's main tables of interest, I haven't even started working on things like DTC masking etc for this E...
by festy
Fri Mar 08, 2013 10:10 pm
Forum: Report A Bug
Topic: Dual monitor context menu issue
Replies: 11
Views: 12728

Thanks - the new build looks great.
by festy
Fri Mar 08, 2013 7:57 pm
Forum: Report A Bug
Topic: Dual monitor context menu issue
Replies: 11
Views: 12728

close - but not quite ;) Yes I get a context menu now, but if you left-click on one table to select it then right-click on a different table, you get the context menu for the first table and not the one you right-clicked on. You can see the second table highlited while you click, but release the but...
by festy
Fri Mar 08, 2013 7:08 pm
Forum: Report A Bug
Topic: Dual monitor context menu issue
Replies: 11
Views: 12728

Glad to hear it wasn't just a case of user error ;)
by festy
Fri Mar 08, 2013 6:08 pm
Forum: Bosch
Topic: XDF for UK Calibra v6
Replies: 5
Views: 8267

I'm guessing that the 357 990 refers to the chip code - I don't have that bin, but I do have 1.267.358.299 which is a Calibra 2.5 bin for the 0.261.203.080 ECU. PM me your email address if you'd lke a copy. Or, you should be able to read the bin out via the diagnostics port. It's slow, but saves pul...
by festy
Fri Mar 08, 2013 5:51 pm
Forum: Report A Bug
Topic: Dual monitor context menu issue
Replies: 11
Views: 12728

Ok, this is a laptop running win7 64 bit. Display 1 is the laptop's screen, display 2 is an LCD monitor hooked up to the laptop's docking station. Display 1 is the primary display (with taskbar etc), display 2 is the extended desktop but it's extended to the left (not to the right like normal setups...
by festy
Fri Mar 08, 2013 2:08 pm
Forum: Report A Bug
Topic: monitor window blank when changing log file
Replies: 4
Views: 8587

I've seen this a few times too.
The monitor window is blank, but the data list shows correctly.
by festy
Wed Mar 06, 2013 7:11 pm
Forum: Report A Bug
Topic: Dual monitor context menu issue
Replies: 11
Views: 12728

Dual monitor context menu issue

I've been having a strange issue with the latest TP5 RT (5.00.8075.00). I have dual monitors on my win7 pc, and when TP is on the main monitor everything is fine, but if I drag it to the second screen none of the right-click context menus show anymore. Drag it back to the main screen and they appear...
by festy
Mon Feb 04, 2013 2:33 pm
Forum: TunerPro Discussion
Topic: SDK help file
Replies: 2
Views: 4316

The help file is compiled HTML, so it will be windows/IE's security settings blocking it.
I can't remember exactly what I did to stop that, it's something like right-click on the .chm file, select properties, and click "unblock" on the General tab...
by festy
Fri May 18, 2012 5:16 pm
Forum: Feature Suggestions
Topic: Limit emulator download to XDF object addresses?
Replies: 2
Views: 6158

Old Motronic ECU, no emulator hardware.
by festy
Thu May 17, 2012 4:33 pm
Forum: Feature Suggestions
Topic: Limit emulator download to XDF object addresses?
Replies: 2
Views: 6158

Limit emulator download to XDF object addresses?

For ECUs with really inefficient serial protocols and/or slow baud rates, downloading the whole bin via an emulator plugin takes a very long time. In some situations the emulator component could speed this up by only reading a predefined region of the bin that contains the cal and padding out the re...