Search found 35 matches

by scott0999
Wed Apr 13, 2011 8:29 am
Forum: TunerPro Discussion
Topic: $24 connects, but no data
Replies: 5
Views: 6617

$24 connects, but no data

I have a 86 Fiero GT 2.8

downloaded the $24 ads. it connnects fine, but shows no information. I'm just trying to display sensor info with the engine not running (since it doesnt start) for diagnostics reasons.

I notice a note about using a 10k resistor.. so where do I put it? thanks
by scott0999
Fri Sep 10, 2010 9:01 pm
Forum: TunerPro Discussion
Topic: log exporting in TP5
Replies: 7
Views: 8396

I dont really want it to export anything. Surely you do. sorry that was a typo, I meant everything. but anyway regardless I would like it like before. I'm using a VE calculator spreadsheet thats setup for the way V4 exports. I like the data tracing in V5, but the log exporting isnt working the way ...
by scott0999
Wed Sep 08, 2010 8:44 pm
Forum: TunerPro Discussion
Topic: log exporting in TP5
Replies: 7
Views: 8396

I would have to agree. bring it back, or give it the option please!
by scott0999
Mon Sep 06, 2010 9:29 pm
Forum: TunerPro Discussion
Topic: log exporting in TP5
Replies: 7
Views: 8396

I dont really want it to export everything. I would prefer it worked just like it did before, or if you could preset it to work that way even

edit for typo
by scott0999
Mon Sep 06, 2010 4:58 pm
Forum: TunerPro Discussion
Topic: log exporting in TP5
Replies: 7
Views: 8396

log exporting in TP5

When I goto export the datalog, it shows a list of 151 things to select that you want in the log

is there a way to make it export like it did in TP4, where you dont have to choose what you want?
by scott0999
Tue Aug 17, 2010 8:18 pm
Forum: TunerPro Discussion
Topic: tracer for datalog playback?
Replies: 8
Views: 9471

yoda69 wrote:2. ALDL datatracing. You need to link the ALDL and xdf together for each table in the xdf. Not all will be able to be done, only those that have both axis information on the ALDL stream.
ok sounds like this is what I need to do. is this how its setup?

Image
by scott0999
Tue Aug 17, 2010 9:23 am
Forum: TunerPro Discussion
Topic: tracer for datalog playback?
Replies: 8
Views: 9471

does it record tracing for all tables, or only 1 at a time?

did you hit the A in the table before recording, or just record?
by scott0999
Tue Aug 17, 2010 7:42 am
Forum: TunerPro Discussion
Topic: tracer for datalog playback?
Replies: 8
Views: 9471

ok I finally tried this today. tracing works fine when just showing live ALDL data. I recorded a datalog and played it back.. the tracing doesnt show in the tables at all
by scott0999
Fri Aug 13, 2010 6:30 am
Forum: TunerPro Discussion
Topic: tracer for datalog playback?
Replies: 8
Views: 9471

tracer for datalog playback?

I understand we now have a tracer for live ALDL data. honestly I havent even used it yet, but I was wondering does this work for playing back the datalog too?

it would be great if the tracer would follow the datalog playback!
by scott0999
Sun Aug 19, 2007 5:45 pm
Forum: General Tuning Discussion
Topic: ALDL Dash
Replies: 5
Views: 7598

ALDL Dash

is there a way to view more than 6 sensors at once in the aldl dash?
by scott0999
Tue Aug 14, 2007 2:24 pm
Forum: General Tuning Discussion
Topic: how to reset BLM?
Replies: 1
Views: 5081

how to reset BLM?

it seems no matter what I set my bpc vs egr to, or how high I increase the VE tables, cell 1 BLM is always 134 with the slightest tap of the throttle

is there a way to reset it within tunerpro?
by scott0999
Sun Aug 12, 2007 4:36 pm
Forum: General Tuning Discussion
Topic: $8F INJ flow rate per single fire
Replies: 3
Views: 6811

whats the double?
by scott0999
Fri Aug 10, 2007 12:29 pm
Forum: General Tuning Discussion
Topic: $8F INJ flow rate per single fire
Replies: 3
Views: 6811

$8F INJ flow rate per single fire

I have installed 39# injectors and using $8F. I changed the INJ flow rate #/hr, but do I need to change the "INJ flow rate per single fire". its located at 65E hex

I adjusted the bpc vs egr as well and the car is driving good. I just want to make sure the ECM has all the correct settings. thanks
by scott0999
Tue Mar 13, 2007 5:38 pm
Forum: Feature Suggestions
Topic: audible sensor alerts
Replies: 2
Views: 5928

audible sensor alerts

when datalogging it would be great if I could get an audible alert if there was knock. or how about if you could configure any sensor to give an alert when it reaches a certain point
by scott0999
Tue Mar 13, 2007 5:33 pm
Forum: Feature Suggestions
Topic: using difference tool with different XDF's
Replies: 3
Views: 7574

Skunk wrote:How about just being able to open/view a second XDF/BIN for a manual comparison.

John
that sounds like a much easier solution. the more I think about it, comparing with different XDF's would be difficult to code
by scott0999
Thu Mar 01, 2007 12:27 pm
Forum: General Motors
Topic: can I choose whats datalogged?
Replies: 1
Views: 4586

can I choose whats datalogged?

when I datalog is there a way I could choose whats datalogged?

reason im asking is I normally organize my datalog so the BLM, INT, RPM, MAP, and KNOCK are together

it would be great if I could just datalog what I need, and if I could choose the order they show up that would be a plus

thanks
by scott0999
Thu Feb 08, 2007 10:03 am
Forum: Feature Suggestions
Topic: using difference tool with different XDF's
Replies: 3
Views: 7574

using difference tool with different XDF's

I have 2 bins that are for a similar setup, except the code mask is different on them. it would be nice to be able to select the XDF for the compare bin
by scott0999
Wed Dec 20, 2006 5:13 pm
Forum: TunerPro Discussion
Topic: removing header from csv?
Replies: 1
Views: 3737

removing header from csv?

the CSV viewer I use wont open the CSV with the first line tunerpro creates. is there a way to not have that in every datalog?
by scott0999
Tue Dec 19, 2006 3:42 pm
Forum: General Tuning Discussion
Topic: INT dropping on decel, but no BLM change?
Replies: 1
Views: 4745

INT dropping on decel, but no BLM change?

I just got done successfully tuning my part throttle, but am still having stalling problems consistently the INT will drop when comming to a stop, then it stalls. Ive tried leaning it out in the low rpm table, but then it stalls on idle when I first start the car, or stalls before I even come to a s...
by scott0999
Mon Dec 18, 2006 4:40 pm
Forum: Report A Bug
Topic: non responsive when resuming from sleep mode
Replies: 2
Views: 6131

if just tunerpro is open and im not on the aldl setup screen it resumes normally.

no biggie, I can just close the aldl screen before putting it to sleep mode
by scott0999
Mon Dec 18, 2006 1:32 pm
Forum: TunerPro Discussion
Topic: injector rate question
Replies: 2
Views: 4842

ok will do. he must of had a different FPR
by scott0999
Mon Dec 18, 2006 9:23 am
Forum: Report A Bug
Topic: non responsive when resuming from sleep mode
Replies: 2
Views: 6131

non responsive when resuming from sleep mode

when I get done datalogging I close the screen on my laptop. it is on the aldl setup screen when I do this then when the laptop comes back up from sleep mode, tunerpro is unresponsive to the point I have to do a hard shutdown. its a dell latitude cpx laptop with a p3-600, 512 ram, windows xp home sp...
by scott0999
Mon Dec 18, 2006 8:50 am
Forum: TunerPro Discussion
Topic: injector rate question
Replies: 2
Views: 4842

injector rate question

im using a bin that was supposed to be tuned for #30 injectors. the person I got it from had a similar setup to mine except he had a supercharger, I have a turbo for some reason he put 35.94 as the injector rate/hr. im not sure why he did that, and my car has been running decent considering. but my ...
by scott0999
Mon Dec 18, 2006 8:19 am
Forum: TunerPro Discussion
Topic: not saving ve values
Replies: 7
Views: 9146

in the datalogs its hard to find a map reading exact to the rpm like it has in the table anyways. so that makes sense why theres .39 resolution. it would take alot of datalogging and searching to match up to the tables so exact.
by scott0999
Mon Dec 18, 2006 8:02 am
Forum: TunerPro Discussion
Topic: not saving ve values
Replies: 7
Views: 9146

ok thanks for clearing that up :)

time to burn 100 chips to get this thing right :lol:
by scott0999
Mon Dec 18, 2006 7:55 am
Forum: TunerPro Discussion
Topic: not saving ve values
Replies: 7
Views: 9146

ok so essentially once I get this tuned, making VE changes by .39, I should be able to get a BLM of 128 when I look at the table it seems like .39 would be too much of a step up/down since the values are small to begin with so im assuming once tuned, the INT should adjust enough not to change BLM fr...
by scott0999
Mon Dec 18, 2006 5:57 am
Forum: TunerPro Discussion
Topic: not saving ve values
Replies: 7
Views: 9146

for instance in a datalog if the blm was 133 at 1800rpm & 20kpa I would do 133/128=1.039 then I would look in the table under 1800rpm@ 20kpa and it would have 5.86 as the VE so I would go 5.86*1.039=6.09 (rounded up) if I try and enter 6.09 it wont save that. it would only save 6.25 I understand why...
by scott0999
Sun Dec 17, 2006 12:38 pm
Forum: TunerPro Discussion
Topic: not saving ve values
Replies: 7
Views: 9146

not saving ve values

im trying to tune my "FUEL Low RPM VE % vs RPM" table. I type in the value I calculated, press enter, it shows in the table and is red. I click save, close the table and go back into it. then the values are back to what they were before. it will only save certain values. how am I supposed to tune ar...
by scott0999
Tue Aug 22, 2006 9:32 pm
Forum: General Tuning Discussion
Topic: got a WB02 datalog now how do I ..
Replies: 4
Views: 8513

Sweet. It's good to hear that the data is matching up. Tuning with the WB is the right thing to do, but you should realize that without going into open loop, tuning will only affect the regions that aren't ECM corrrected (WOT tuning necessitates the WB). Everywhere else the computer corrects the fu...
by scott0999
Tue Aug 22, 2006 8:33 pm
Forum: General Tuning Discussion
Topic: got a WB02 datalog now how do I ..
Replies: 4
Views: 8513

I'd start by reading and re-reading all the stickies at the top of this board: http://www.thirdgen.org/techboard/diy-prom/ Then post there when you feel like you've digested what you can and have some specific questions. You're on the right track (you've got the right equipment)! thanks for the rep...
by scott0999
Tue Aug 22, 2006 10:28 am
Forum: General Tuning Discussion
Topic: got a WB02 datalog now how do I ..
Replies: 4
Views: 8513

got a WB02 datalog now how do I ..

I've been reading alot about tuning but still not finding the information I need. I just got idle and 1st-3rd gear datalogs. its showing a little knock retard in 3rd gear and AFR is far from tuned. I'm not really sure where to begin so if someone can give me a good link or take a look at these datal...
by scott0999
Fri Aug 11, 2006 2:38 pm
Forum: TunerPro Discussion
Topic: importing differences from a bin
Replies: 4
Views: 6258

sweet thanks!
by scott0999
Fri Aug 11, 2006 2:34 pm
Forum: TunerPro Discussion
Topic: importing differences from a bin
Replies: 4
Views: 6258

That functionality will be in in the next major TunerPro release. In fact, a full patch creation and importation engine will be in the next major release. =) ok, now for the ones that say "item not defined", how do I change those settings in the bin im patching manually? I will be looking foward to...
by scott0999
Fri Aug 11, 2006 11:13 am
Forum: TunerPro Discussion
Topic: importing differences from a bin
Replies: 4
Views: 6258

importing differences from a bin

from using the difference tool, I can select the differences but cannot figure out how to add them into another bin all at once?

in essence making a "patch" file
by scott0999
Sat Apr 01, 2006 7:57 pm
Forum: General Tuning Discussion
Topic: new to tuning need help
Replies: 1
Views: 4834

new to tuning need help

hello, this is my first post on this site. I have tunerpro rt installed and I have the aldl cables for my car. I know how to datalog but have never tuned before. what am I looking for and what do I change?