Search found 10 matches

by DENN_SHAH
Sat Jun 27, 2009 9:42 pm
Forum: Report A Bug
Topic: not sure if its a bug, but...
Replies: 3
Views: 7016

Mark, it does the same thing on both of my PCs, i run 800x600.
being able to resize that dialog would be nice for us old guys who have bad eyes :D
(if windows would still let me, i would be running at 640x480)
by DENN_SHAH
Wed Aug 01, 2007 10:30 pm
Forum: General Motors
Topic: Does wrong Code Mask cause "no connection" error
Replies: 4
Views: 8816

95 was pretty much a conversion year. some vehicles were OBD1, some were OBD2. some OBD1 vehicles had the OBD2 ALDL, what some call OBD1.5 but they are still OBD1 & you can flash codes by jumpering the right 2 terminals in the ALDL. with OBD2, you can only get codes with a scanner of some kind. OBD1...
by DENN_SHAH
Mon Jun 18, 2007 8:17 pm
Forum: General Motors
Topic: adding XDF items, 7730, 8D, AUJP
Replies: 3
Views: 8230

i put them in Constants/Scalers like you said.
one of the guys in the post said they got a CEL with them set at 00, i set them to 01 & it works good, no more unlock in decel :D
by DENN_SHAH
Fri Jun 08, 2007 9:14 pm
Forum: General Motors
Topic: adding XDF items, 7730, 8D, AUJP
Replies: 3
Views: 8230

Thanks Mark, i'll do it & try it out in a day or so.
by DENN_SHAH
Tue Jun 05, 2007 8:32 pm
Forum: General Motors
Topic: adding XDF items, 7730, 8D, AUJP
Replies: 3
Views: 8230

adding XDF items, 7730, 8D, AUJP

i want to add some items to my XDF relating to this post, http://www.thirdgen.org/techboard/diy-prom/117389-decel-tcc-unlock-aujp.html i believe these are all flags/switches i want to add. if i understand right, this is what i do for each of these items. first i want to select insert new XDF item, n...
by DENN_SHAH
Mon May 21, 2007 10:21 pm
Forum: General Motors
Topic: What XDF do I use?
Replies: 4
Views: 9669

first you'll need to either find the right definition file, or make your own. TunerPro uses either an XDF or an ECU file for the bin definition which is for the most part specific to each ECM, vehicle & motor. older versions of TunerPro used the ECU file while the newer versions use the XDF. the old...
by DENN_SHAH
Sun May 20, 2007 4:07 pm
Forum: General Motors
Topic: What XDF do I use?
Replies: 4
Views: 9669

it sounds like your using the wrong bin definition file from what i can tell, it looks like you have the $85 mask. i may be wrong, but it looks like that ECM was only used in very limited applications. i don't know if anyone has done a def file for that ECM or not. you may find what you need here, h...
by DENN_SHAH
Tue May 08, 2007 11:20 pm
Forum: Report A Bug
Topic: TunerPro RT 4.14 locks up when "upload failed"
Replies: 8
Views: 12151

i had the very same problem about a year or so ago with XP pro. i don't remember just what i did to fix it now, i think it was a setting in either windows or TunerPro. it drove me nuts for a few days & it turned out to be something simple. i remember it went from working fine to having problems over...
by DENN_SHAH
Tue May 08, 2007 11:04 pm
Forum: ScannerPro Beta Discussion
Topic: getting started
Replies: 1
Views: 12066

i have a small 8D log, but you don't have an email address listed.
i think you'll really like what you see with ScannerPro, i know i like it, i like it alot :lol:
by DENN_SHAH
Tue May 08, 2007 10:58 pm
Forum: ScannerPro Beta Discussion
Topic: scannerpro or Datamaster? and why....
Replies: 3
Views: 15562

ScannerPro is new & still under development, so you can't really compare it to data master. TunerPro is fully developed & works quite good. i have used data master for some data logging, but 99.9% of the time i use TunerPro. with TunerPro, along with data logging, you can edit your bin file & with t...