Search found 24 matches

by Acki
Thu Jul 18, 2019 11:46 am
Forum: Report A Bug
Topic: Datastream failures / Realterm shows perfect
Replies: 9
Views: 3296

Re: Datastream failures / Realterm shows perfect

How can I support?
by Acki
Sat Jun 15, 2019 11:07 am
Forum: Report A Bug
Topic: Datastream failures / Realterm shows perfect
Replies: 9
Views: 3296

Re: Datastream failures / Realterm shows perfect

Any chance that the "playback speed" bug will be solved soon?
by Acki
Fri May 10, 2019 7:00 am
Forum: Report A Bug
Topic: Potential XDF editor. Parameter Low/High range issue
Replies: 1
Views: 306

Re: Potential XDF editor. Parameter Low/High range issue

Wrong / non conversion factor. When you use the values "direct" then is 0 the smallest possible input. Run is this failure years ago when I used to limit the maximum in a fuel table - unfortunately TP doesn't shows you when you run into this limit. You raise or lower the value, you save it and nothi...
by Acki
Wed Dec 19, 2018 3:58 pm
Forum: Bosch
Topic: Has anyone on here disassembled the 413 code?
Replies: 64
Views: 9932

Table Access, look for code similar to this: push PSW push B push DPH push DPL mov DPH, RAM_77 mov DPL, RAM_78 mov A, R2 inc R2 setb PSW.3 movc A, @A+DPTR
by Acki
Thu Dec 13, 2018 5:37 pm
Forum: Report A Bug
Topic: Datastream failures / Realterm shows perfect
Replies: 9
Views: 3296

Tested at 3 different pc.
by Acki
Mon Nov 19, 2018 4:18 am
Forum: Report A Bug
Topic: TunerProRT v5 sporadic bad data
Replies: 25
Views: 43994

It's a monitor bug...
http://forum.tunerpro.net/viewtopic.php?t=4555

But nobody cares...
by Acki
Mon Oct 29, 2018 12:08 am
Forum: Feature Suggestions
Topic: Section marking in table
Replies: 0
Views: 593

Section marking in table

I would be a great option to make some section in the tables.
A color marking (frame lines control?) would be enough.

Usage for different lambda correction values etc. pp.

Image
by Acki
Mon Oct 29, 2018 12:04 am
Forum: Report A Bug
Topic: Datastream failures / Realterm shows perfect
Replies: 9
Views: 3296

Playback has no function. 50% or 2500 times faster, run time of the playback is the same... also tested if pause/play is needed to switch the speed, no difference. Today I measured the speed of the playback. 1s log file - 3s playback time. Doesn't matter which play speed is used. Any chance to get ...
by Acki
Mon Oct 29, 2018 12:02 am
Forum: Report A Bug
Topic: Win 7 64 bit problem
Replies: 3
Views: 981

View by parameter category you may looking for?
by Acki
Mon Oct 22, 2018 2:34 pm
Forum: Report A Bug
Topic: Win 7 64 bit problem
Replies: 3
Views: 981

Use google and download the file ;)
by Acki
Tue Apr 10, 2018 10:09 am
Forum: Feature Suggestions
Topic: Why not pictures for bits?
Replies: 6
Views: 7197

Mangus wrote:Why not define a scalar for exactly this purpose?
I understand it now.
Using a scalar and then playing with the alarm function...

/edit:
Ok... Bitmask XOR 1 result 0/1 is what I was looking for...
by Acki
Fri Mar 30, 2018 6:14 am
Forum: Report A Bug
Topic: Datastream failures / Realterm shows perfect
Replies: 9
Views: 3296

Multi Screen or Multi instance has also some issues you have to take car. Primary screen shows the pull down menu only, multi instance only impacting the first opened session - I guess some layer issues?! A nice feature would be to start recording when datastream is connected, that you can log the c...
by Acki
Fri Mar 02, 2018 10:56 am
Forum: Report A Bug
Topic: Datastream failures / Realterm shows perfect
Replies: 9
Views: 3296

Playback has no function. 50% or 2500 times faster, run time of the playback is the same... also tested if pause/play is needed to switch the speed, no difference.
by Acki
Thu Mar 01, 2018 3:23 am
Forum: Feature Suggestions
Topic: Why not pictures for bits?
Replies: 6
Views: 7197

I have a Ram_Cell, let's call it RAM_28. RAM_28.0 - RAM_28.7 are my flags. set RAM_28.0 means 0000 0001b = 1d set RAM_28.7 means 1000 0000b = 128d Both would lead to 1000 0001b = 129d 1000 0010b = 130d 1000 0011b = 131d The evaluation of this dec number is not easy possible - or I didn't find the ri...
by Acki
Mon Feb 26, 2018 11:29 am
Forum: Feature Suggestions
Topic: Why not pictures for bits?
Replies: 6
Views: 7197

I have some "flag registers" which I would like to show. 8 bits per flag, would be awesome to realize this somehow. The flag can be 1000 0000 or 0001 0111 for example - would be very nice when I could use a value binary. I would think easiest way would to allow to define a value as binary which I ca...
by Acki
Mon Feb 26, 2018 11:23 am
Forum: Feature Suggestions
Topic: update checksum during emulation
Replies: 1
Views: 3958

It's 3 years old but TunerPro shows yellow message "Checksum updated" everytime you save something. Depending on the ECM you should look for the Checksum routine or at least for the DTC setting. When your DTC is 65535 (FF FFh) then you could look for internal DTC 1. (Bosch Motronic is working in thi...
by Acki
Mon Feb 26, 2018 11:21 am
Forum: Report A Bug
Topic: Datastream failures / Realterm shows perfect
Replies: 9
Views: 3296

The monitor function seems to be a little bit buggy, possible that nobody used it before in this way. Datastream is working without any issue as long as I don't open the Monitor. History is also great :) When I playback a log file and I use the scrollable (is it the correct naming?) TunerPro doesn't...
by Acki
Thu Feb 22, 2018 11:44 am
Forum: Report A Bug
Topic: Datastream failures / Realterm shows perfect
Replies: 9
Views: 3296

Datastream failures / Realterm shows perfect

My datastream went corrupt after a fixed amount of seconds. 11-17s depending on the baudrate and if I use the "Silent" Macro to stop reading the stream for some ms. I can produce this failure when I use a value which changes very fast. TPS signal or something else (some ram value which is switching ...
by Acki
Mon Feb 19, 2018 10:54 am
Forum: Feature Suggestions
Topic: More COM ports to data aqusition
Replies: 9
Views: 10370

Open Realterm and listen the transfer :)

LC1 sends out B2 82 43 13 as header/footer and the lambda value in between.
Can't be more complicated with other Innovate stuff.
by Acki
Sat Feb 17, 2018 2:49 pm
Forum: Feature Suggestions
Topic: More COM ports to data aqusition
Replies: 9
Views: 10370

Plugin for what? LC1? Other Innovate stuff?
by Acki
Fri Feb 16, 2018 3:45 am
Forum: Feature Suggestions
Topic: More COM ports to data aqusition
Replies: 9
Views: 10370

It would be enough when it would be possible to load 2 PlugIns at the same time - for each PlugIn a own ADX file and at the "first slot" you can but everything into Monitor or whatever or same Monitor/Dash for all. Only datastream related stuff is PlugIn related. 2 ports at one Plugin is possibl�e...
by Acki
Tue Mar 12, 2013 6:01 am
Forum: Bosch
Topic: VW/AUDI ADX file
Replies: 1
Views: 4354

Nothing? Oha... and Manual is not very helpful to create a own, also with KWP1281 commands... :cry:
by Acki
Thu Mar 07, 2013 3:51 am
Forum: Report A Bug
Topic: Dual monitor context menu issue
Replies: 11
Views: 12384

Change of cell equation is also not possible... this costs me 1 hour... jesus :D
by Acki
Wed Mar 06, 2013 12:08 pm
Forum: Bosch
Topic: VW/AUDI ADX file
Replies: 1
Views: 4354

VW/AUDI ADX file

Has somebody a ADX file for VW/Audi?
I'm looking for a file which I could use a start point for my own ADX file.

Thx for every help!