Search found 29 matches

by biela
Sun Apr 07, 2019 11:59 pm
Forum: Ducati
Topic: Which cable chip for Ducati 748 Magneti Marelli 16M ECU
Replies: 1
Views: 208

Re: Which cable chip for Ducati 748 Magneti Marelli 16M ECU

Hello

Have you tried to extract the eprom or chip?
Then you can read it with an external eprom reader.

http://www.bikeboy.org/products.html#16m
by biela
Mon Jan 07, 2019 6:43 am
Forum: Bosch
Topic: Has anyone on here disassembled the 413 code?
Replies: 64
Views: 8056

Hello I have found Acki´s code in M1.3 and M1.7 8051 ecus. But i have no luck in M3.3 80196 ecu. May be in 80196 is something like this?: ROM:5349 ROM_5349: ROM:5349 ROM:5349 stb INTMEM_48+1, INTMEM_D3_IAT ; Store byte ROM:534C ldb INTMEM_26+1, ROM_1451[] ; Load byte ROM:5351 ld INTMEM_1A, #6 ; Load...
by biela
Wed Oct 31, 2018 1:28 am
Forum: Bosch
Topic: Has anyone on here disassembled the 413 code?
Replies: 64
Views: 8056

Hello

Can you post a simple function explained?
Like table/map look up calls.

Thanks
by biela
Sun Sep 09, 2018 11:16 pm
Forum: Bosch
Topic: Opel C20xe
Replies: 2
Views: 1203

For example:

6894 - Fuel WOT
68F0 - Fuel PT
6D4A - Ignition PT
6E98 - Ignition WOT
6F7D - Dwell angle

You can search for similar maps.
by biela
Tue May 22, 2018 10:47 pm
Forum: Other Motorcycle Makes
Topic: Suzuki
Replies: 4
Views: 1973

Hello

I think TL1000 has got Denso ECU.

May be we know us from another forum?
by biela
Mon Jan 22, 2018 1:53 am
Forum: Bosch
Topic: Alfa M1.7 164LS V6 24V anyone have.xdf?
Replies: 3
Views: 2432

Hello

You can find some definitions here:
https://pcmhacking.net/forums/viewtopic ... 163e51e180
by biela
Sat Dec 09, 2017 2:30 am
Forum: Bosch
Topic: Actual motronic load calculation
Replies: 1
Views: 2220

Hello I think it is a more detailed explanation from: Motronic needs exactly three things to calculate LOAD. 1) A signal from the air meter, normalized to "Q" airflow in kg/hr 2) A measure of current engine rpm "n" 3) A programmed injector size constant "Ki" (K sub eye) LOAD aka Tl (Tee sub ell) is ...
by biela
Sun Dec 03, 2017 10:55 am
Forum: Bosch
Topic: XDF for E36 euro M3 S50B30
Replies: 10
Views: 7046

Hello

Intake vanos map is at 2820 16x16

2800 is TPS or load.

2810 is rpm.
by biela
Sun Nov 19, 2017 3:51 am
Forum: Ford
Topic: Ford (EU) Zetec - GSAZ1 - GSBA0 *Def*
Replies: 14
Views: 19124

Hi, Problem solved, now you can download the files, I'll ask to tvrfan for some indications, thanks I think that you can emulate those eproms in your sierra EECIV if have a MAP and DOHC motor, I have emulated the 1988 8BAC on 1992 2GGA without problems, if you can share your Sierra's BIN's I would ...
by biela
Wed Oct 04, 2017 11:35 pm
Forum: Other Motorcycle Makes
Topic: XDF file for Honda CBR600RR
Replies: 3
Views: 3312

Hello

Which tool did you use to read the ECU map?
I am interested in the xdf also.

Thanks
by biela
Wed Nov 09, 2016 2:13 am
Forum: Ducati
Topic: Multistrada620
Replies: 2
Views: 3706

Hello

Do you have tried any Monster 620 xdf?
by biela
Tue Oct 25, 2016 11:55 pm
Forum: Ducati
Topic: Anyone have a xdf file for a 06 749 ?
Replies: 6
Views: 5314

Hello

Which is your ECU ref number?
by biela
Wed Dec 09, 2015 11:57 pm
Forum: Bosch
Topic: Please help me understand M60 V8 404 DME ignition timing
Replies: 11
Views: 9578

Try with:
Major Order: Row
12 Rows and 10 columns
Conversion: x*0.75-45
by biela
Sat Dec 05, 2015 11:02 am
Forum: Bosch
Topic: Please help me understand M60 V8 404 DME ignition timing
Replies: 11
Views: 9578

Factor: 0.75 and offset:-45?
by biela
Fri May 22, 2015 6:59 am
Forum: Bosch
Topic: 179 DME 1267356460 soft xdf
Replies: 19
Views: 27363

May be 4B71 2x4 is another fuel idle map?
The numbers in fuel maps are modifiers, not AFR targets.
Factor for load is 0.05. You get ms.
And may be IAT uses the same factor than CTS.
by biela
Sat May 09, 2015 12:07 am
Forum: Bosch
Topic: 1995 318i 282 Box
Replies: 5
Views: 6201

Hello
I can help you for the 595 xdf.
Can you send me your ori and mod bin files?
by biela
Thu May 07, 2015 11:18 pm
Forum: Bosch
Topic: 1995 318i 282 Box
Replies: 5
Views: 6201

Hello
You need a xdf for 595 chip.
And you are using an xdf for 626 chip.
by biela
Tue Jan 13, 2015 11:13 am
Forum: Bosch
Topic: 179 DME 1267356460 soft xdf
Replies: 19
Views: 27363

Well, i have not tested, but the fuel maps i am speaking about have similar shapes to others.
by biela
Mon Jan 12, 2015 2:05 am
Forum: Bosch
Topic: 179 DME 1267356460 soft xdf
Replies: 19
Views: 27363

Yes, the 179_460 bin file.

Thanks
by biela
Wed Nov 12, 2014 12:40 pm
Forum: Bosch
Topic: 179 DME 1267356460 soft xdf
Replies: 19
Views: 27363

I think Fuel HIGH load map1 is 5033.
Another 6x14 Fuel HIGH load map could be 4E47.

I think Fuel LOW load map1 is 4DCD 7x14 map.

Can you upload 179_460 ori file?
by biela
Wed Nov 12, 2014 11:58 am
Forum: Bosch
Topic: My Project: BMW e28 M535i, 179 DME Motronic 1.3 with CR 10:1
Replies: 2
Views: 5326

55F9 could be also idle ignition?
by biela
Sun Oct 26, 2014 12:08 pm
Forum: Bosch
Topic: A few questions. M20b25 173DME
Replies: 3
Views: 4977

On the fuel maps the axis are rpm and load. Inside the map there are trim values applied to the fuel.
A safe range in NA could be 12.5 AFR, richer in FI to avoid detonation.
Timing needs varies with load.
by biela
Wed Oct 22, 2014 11:16 am
Forum: Ducati
Topic: Ducati ST4s (IAW59M)
Replies: 10
Views: 17290

XDF added:

Ducati ST4s 2001 xdf

Any comments are welcome.

I think the delta fuel map adds or susbtracts fuel from main fuel map.
And the second ECT fuel trim affects during warm-up.
by biela
Tue Oct 07, 2014 12:48 pm
Forum: Ducati
Topic: Ducati ST4s (IAW59M)
Replies: 10
Views: 17290

kiaku, the second fuel map has got correction values.

In my bin 39610 goes from 1200 max to 970 min.

BGRSGrant, i have upload my bin to irok web. I think i will finish my xdf this week.
by biela
Mon Sep 29, 2014 1:10 am
Forum: Ducati
Topic: Ducati ST4s (IAW59M)
Replies: 10
Views: 17290

by biela
Sat Sep 27, 2014 12:38 pm
Forum: Ducati
Topic: Ducati ST4s (IAW59M)
Replies: 10
Views: 17290

I have been working with winols. Can you check if them are right? 38028 20x32 fuel - f(RPM/TPS) horizontal cylinder 38528 20x32 delta fuel - f(RPM/TPS) vertical cylinder 3c2ec 20x32 spark 39D70 - axis X - TPS 39D98 - axis Y - RPM 38A28 13x16 - fuel trim f (atm pressure, air temp) 39610 20x16 - fuel ...
by biela
Mon Sep 22, 2014 10:21 am
Forum: Ducati
Topic: Ducati ST4s (IAW59M)
Replies: 10
Views: 17290

I have some addresses that i´d like to confirm.
What ECU version do you have?
Mine is DUCATI009 S09DC011.
by biela
Sun Aug 31, 2014 7:20 am
Forum: Bosch
Topic: The Motronic 1.3 Thread
Replies: 14
Views: 28977

I think that descriptor for Voltage is "36".
¿0,068 for factor?
by biela
Wed Jul 23, 2014 11:40 am
Forum: Ducati
Topic: Ducati ST4s (IAW59M)
Replies: 10
Views: 17290

Ducati ST4s (IAW59M)

Hello,

I want to modify the maps of my Ducati ST4s (IAW59M) 2001 year.
I will try to build a .xdf file.
I have the .bin file. It has been read from the ECU by a MPPS tool.

Best regards