Search found 566 matches

by dex
Fri May 16, 2014 12:50 am
Forum: Report A Bug
Topic: Version 5.00.8383 not running on specific notebook
Replies: 20
Views: 40892

The Visual C++ Redistributable Package for Visual Studio 2013 is already installed on this particular pc. Following XP SP3 installation I get a different error now; "error signature". Deleting the TunerPro setting .dat files did not appear to affect anything. I know what you are saying about Windows...
by dex
Mon May 12, 2014 2:51 am
Forum: Report A Bug
Topic: Version 5.00.8383 not running on specific notebook
Replies: 20
Views: 40892

In the same boat here, I get a similar error message stating "The procedure entry point GetLogicalProcessorInformation could not be located in the dynamic link library KERNEL32.DLL." Uninstalling and reinstalling the previously working version (8200) gets me back to a working version. Running XP pro...
by dex
Wed Feb 19, 2014 3:02 am
Forum: TunerPro Discussion
Topic: Another Mode 3 Question
Replies: 19
Views: 23173

I do not know the code well enough so I am afraid I have no idea why an invalid checksum in the $8D did not throw a code or go into limp home mode. Hopefully some one else may know and will chime in.
by dex
Tue Feb 18, 2014 7:10 am
Forum: TunerPro Discussion
Topic: Another Mode 3 Question
Replies: 19
Views: 23173

When changing the 0x6F to 0x3F are you updating the bin checksum or setting the engineering mode checksum bypass?
by dex
Tue Feb 18, 2014 12:58 am
Forum: TunerPro Discussion
Topic: Another Mode 3 Question
Replies: 19
Views: 23173

I am guessing you mean L4008 not L0048. You may not be seeing any data because I have a feeling that when the SCSR register is read the bits are cleared. This is because in the $74 code I can see where the register is read but nothing is done with the data which is kind of typical for clearing a reg...
by dex
Mon Feb 17, 2014 3:49 am
Forum: TunerPro Discussion
Topic: Another Mode 3 Question
Replies: 19
Views: 23173

If you change the 0x6F to 0x3F and something makes a request for 16 bit data using the address range 0x4000 to 0x6FFF then it will be treated as a request for 8 bit data. I cannot say if this will or will not happen as I am not familiar with the $8D ecu and do not know what communications will be po...
by dex
Sat Feb 15, 2014 1:48 pm
Forum: TunerPro Discussion
Topic: Another Mode 3 Question
Replies: 19
Views: 23173

appears to be 0x6C22 in hex editor while 0xEC22 in the .LST file -- is that the same address? Yes, if you are using a 32k bin file. Given the change is in the transmit interrupt handler and will only be temporary while doing the Mode 3 request for 0x4008, would it be correct that while the 6F/3F ch...
by dex
Sat Feb 15, 2014 12:05 am
Forum: TunerPro Discussion
Topic: Another Mode 3 Question
Replies: 19
Views: 23173

I have briefly looked at the $8D ANHT code and it is the same as the $74 code with any data between the addresses 0x3000 and 0x6FFF being treated as a 16 bit data request. You could therefore alter the byte at 0xEC1A (0xEC22 for the $8D AUJP) from 0x6F to 0x3F to limit word sized data requests to 0x...
by dex
Wed Feb 12, 2014 11:03 pm
Forum: TunerPro Discussion
Topic: Another Mode 3 Question
Replies: 19
Views: 23173

How is the request checksum being handled? I ask because it's not shown in the examples you give.
by dex
Wed Feb 12, 2014 1:28 am
Forum: TunerPro Discussion
Topic: Another Mode 3 Question
Replies: 19
Views: 23173

I suspect the problem is that any address in the 0x4xxx range is getting treated as a call for a word of data (for example in the $74 code any data between the addresses 0x3000 and 0x6FFF is treated as a 16 bit data request). So instead of the SCI status register the ecu is giving you whatever data ...
by dex
Thu Jan 23, 2014 1:53 am
Forum: TunerPro Discussion
Topic: Tuner Pro RT Items list
Replies: 3
Views: 5857

Group the items into different "Item List Views", you can then use the drop down box in the "Item Lists" window to select which group you wish to see.
by dex
Tue Jan 07, 2014 11:23 pm
Forum: TunerPro Discussion
Topic: inconsistency in logging data
Replies: 2
Views: 4356

by dex
Sun Dec 29, 2013 12:07 am
Forum: TunerPro Discussion
Topic: Diagnostic Data Stream Questions (ANHT & AUJP)
Replies: 6
Views: 9488

These are not three different methods but show data from three different address ranges. 1) The size of the data is not dictating the addresses, it just happens to be that in the examples you cited they are from different address ranges. 2) A bin file typically only is comprised of the data in the r...
by dex
Sat Sep 21, 2013 10:10 pm
Forum: Other Car/Truck Makes
Topic: XDF for fiat coupe 20v turbo
Replies: 10
Views: 27509

Here are a couple of bin files:

358892

357896
by dex
Fri Aug 23, 2013 3:43 am
Forum: General Motors
Topic: NEED A RELIABLE BIN FOR 90 IROC-Z 5.7L TPI
Replies: 5
Views: 7882

There are loads of bin file on the site, do you mean you cannot find the one you want?
by dex
Fri Aug 23, 2013 1:09 am
Forum: General Motors
Topic: NEED A RELIABLE BIN FOR 90 IROC-Z 5.7L TPI
Replies: 5
Views: 7882

Try the http://www.gearhead-efi.com site.

Also, could you please turn off the 'caps lock' when typing :D
by dex
Thu Aug 01, 2013 2:18 am
Forum: TunerPro Discussion
Topic: Parameter tree jumps
Replies: 3
Views: 6885

dfddfd2 wrote:That might be "Item List Tracking" on General tab of Preferences.
Correct, it is.
by dex
Tue Jul 30, 2013 1:33 am
Forum: Ford
Topic: JPA1 bin for '97 V6 Mustang
Replies: 6
Views: 11766

TunerPro will always read the bin size you set it to but if the J3 is not clean it will read garbage. In addition to the protective grease most J3 connectors are protected with a clean conformal coating.
by dex
Wed Jul 24, 2013 5:55 am
Forum: Ford
Topic: JPA1 bin for '97 V6 Mustang
Replies: 6
Views: 11766

If you cannot get a good read then the J3 connector may require cleaning.
by dex
Wed Jun 19, 2013 3:41 am
Forum: Ford
Topic: TunerPro work with Tweecer RT?
Replies: 6
Views: 14128

No, it will not. There is no easy way that I'm aware of, I think a plug-in would need writing.
by dex
Fri May 03, 2013 10:19 pm
Forum: Ford
Topic: Connecting to a 01 Mustang GT with TunerPro...
Replies: 4
Views: 9997

No idea, IIRC an example of the hardware code is SME-505.
by dex
Thu May 02, 2013 11:54 pm
Forum: Ford
Topic: Connecting to a 01 Mustang GT with TunerPro...
Replies: 4
Views: 9997

EFIDynoTuning wrote:the eec 4s do not have a flash ram chip
Some of the later eec-iv's do have flash memory 8)
by dex
Mon Mar 04, 2013 5:29 am
Forum: TunerPro Discussion
Topic: cant load xdf
Replies: 1
Views: 4153

In the Windows save file dialogue window you need to select 'All Files' in the 'Save as type' drop down box. Make sure you have '.xdf' after the file name.
by dex
Thu Feb 21, 2013 5:50 am
Forum: Ford
Topic: padding mustang bin
Replies: 3
Views: 7499

Each of the 4 banks needs 0x2000 of null data inserting before it. Additionally, you need to insert 0x2000 of null data at the end of bank 1.
by dex
Tue Feb 05, 2013 3:30 am
Forum: Ford
Topic: Opinions Please!
Replies: 2
Views: 5784

AFAIK there is no other datalogging capable hardware for use with TunerPro on Fords.
by dex
Thu Jan 31, 2013 3:29 am
Forum: Ford
Topic: padding mustang bin
Replies: 3
Views: 7499

You need to use a hexadecimal editor (such a HDD Software's 'Hex Editor' v2.0) to insert null data before each of the 4 banks of code/data in your bin so that the banks start at 0x2000. It's good practice to fill the null data with values of 0xFF.
by dex
Mon Jan 28, 2013 8:31 am
Forum: Report A Bug
Topic: Null bin file name not in title bar
Replies: 7
Views: 14758

I can open any bin apart from one with only null data in it when there's no xdf loaded.

Maybe TP is being smart :D
by dex
Mon Jan 28, 2013 8:07 am
Forum: Report A Bug
Topic: Null bin file name not in title bar
Replies: 7
Views: 14758

I've just opened a 32k bin file full of null data without a problem so I don't think it's the null data that's the issue.

Have you tried a different xdf?
by dex
Tue Jan 22, 2013 7:59 am
Forum: TunerPro Discussion
Topic: BLM Update Rate – AUJP $8d
Replies: 14
Views: 16678

I'm saying the equation is X/20. Assuming the value at 0x851B is 0x1C and the update timer is incremented every 0.05 seconds then looking at it simplistically: If the timer is 1.35 secs (or less) then the carry is set and a jump occurs. If the timer is 1.40 secs then the carry is clear and no jump o...
by dex
Tue Jan 22, 2013 1:48 am
Forum: TunerPro Discussion
Topic: BLM Update Rate – AUJP $8d
Replies: 14
Views: 16678

Looking at that snippet of $8D disassembly the minimum time that must elapse before an update is permitted is X/20. My reasoning being is that the BCS jump occurs when the update timer < 1.4 seconds and doesn't occur when the update timer is >= 1.4 seconds.
by dex
Sat Jan 19, 2013 11:32 pm
Forum: TunerPro Discussion
Topic: BLM Update Rate – AUJP $8d
Replies: 14
Views: 16678

I disagree that the incrementing of the timer causes a "+1" to come into play, it's the choice of the branch instruction that determines the equation. The timer increment just means that the timer has a minimum value of 0.05 secs before it is compared against the KBLMCNT value.
by dex
Sat Jan 19, 2013 12:05 am
Forum: TunerPro Discussion
Topic: BLM Update Rate – AUJP $8d
Replies: 14
Views: 16678

To determine the minimum time that must elapse before an update is permitted it is down to what branch instruction the code uses, the order of the values and what the code executed next does. For example: if BLMTMR <= KBLMCNT then 'clear learn control enable flag' the equation would be X/20 yet for ...
by dex
Fri Jan 18, 2013 9:43 am
Forum: TunerPro Discussion
Topic: BLM Update Rate – AUJP $8d
Replies: 14
Views: 16678

You would have to look at the code to see how often the BLM update timer is incremented. From what you've posted it would appear to be every 1/20 second. Therefore the minimum time that must elapse before an update is permitted is either X/20 or (X-1)/20 depending on the branch instruction used.
by dex
Sat Jan 12, 2013 10:43 am
Forum: Report A Bug
Topic: tuner pro download - version is wrong
Replies: 4
Views: 9706

Use the 'Check Internet for Updates' from the 'Help' drop down menu to get build 5.0.8075.
by dex
Thu Jan 03, 2013 3:27 am
Forum: Ford
Topic: TunerPro ELM 327 OBD II. For Mac OSX?
Replies: 1
Views: 6280

The ELM327 will allow reading of OBD-II data and clearing of error codes but not any tuning.

For use with a Mac you'll need MAC OS specific s/w such as 'Movi'.
by dex
Wed Jan 02, 2013 11:48 am
Forum: TunerPro Discussion
Topic: TunerPro RT V5 vs. Moates Ostrich 2.0 - "DA: Not Connec
Replies: 1
Views: 5188

The Ostrich is only an emulator and does not facilitate the transfer of datalogging information back to a pc.
by dex
Mon Dec 31, 2012 6:44 am
Forum: TunerPro Discussion
Topic: GM 1 Bar MAP Conversion Equation (Volts to In Hg)?
Replies: 8
Views: 8428

1 kPa = 0.2952999 in Hg
by dex
Sun Dec 30, 2012 11:30 pm
Forum: TunerPro Discussion
Topic: GM 1 Bar MAP Conversion Equation (Volts to In Hg)?
Replies: 8
Views: 8428

Probably best to search for a datasheet for the part number you are using. For example the 12247571 two bar map sensor gives this for its transfer: At 25 deg C and 5.1 v supply the output is: 20 kPa = 0.199 v to 0.413 v 40 kPa = 0.755 v to 0.877 v 160 kPa = 3.815 v to 3.937 v 200 kPa = 4.814 v to 4....
by dex
Fri Dec 21, 2012 11:05 pm
Forum: TunerPro Discussion
Topic: Consult
Replies: 1
Views: 3810

Have you looked at the TunerPro help files? Everything you need is in there for what most people put into an xdf.
by dex
Fri Nov 16, 2012 11:24 am
Forum: General Motors
Topic: 1994 GMC 2500 350/4L80E
Replies: 3
Views: 5752

Not sure what type of ecu yours is but if it's a P4 type then you can use an adapter like this to read the eprom http://www.moates.net/hdr1-memcal-header.html
by dex
Fri Oct 19, 2012 7:08 am
Forum: Report A Bug
Topic: TunerProRT v5 sporadic bad data
Replies: 26
Views: 54604

Out of curiosity, are people seeing this issue with ALDL -> USB or ALDL -> RS232 cables?

I'm getting glitches (no luck with using a variety of delays and the packet size is correct) with a ALDL -> USB cable and was wondering if it relates to the use of a virtual com port.
by dex
Thu Oct 04, 2012 10:30 pm
Forum: General Tuning Discussion
Topic: Toyota 4AGE 20v ecu 89661-1A470
Replies: 2
Views: 8499

I'm sure it's possible, google "MR2" and "JMR_AW11" for ecu info by a guy who has delved extensively into the 16v ecu. I expect the 20v is very similar.
by dex
Tue Jul 31, 2012 6:45 am
Forum: TunerPro Discussion
Topic: DA not connected Windows 7
Replies: 3
Views: 5993

It is under the 'Properties' setting for the device in the Windows 'Device Manager'.
by dex
Tue Jul 31, 2012 5:43 am
Forum: TunerPro Discussion
Topic: DA not connected Windows 7
Replies: 3
Views: 5993

I'm not sure if the same applies to TunerPro but on another piece of tuning software you typically have to set the USB latency timer to 2 for Windows Vista, and Windows 7 and to 16 on Windows XP for the QH.
by dex
Sat Jul 21, 2012 10:50 am
Forum: Other Car/Truck Makes
Topic: I pay to make a XDF from my BIN
Replies: 9
Views: 20030

Have you tried this website http://www.fenixecu.com/
by dex
Tue Jun 12, 2012 11:38 pm
Forum: Ford
Topic: newbie with qh no bin info
Replies: 3
Views: 7717

by dex
Wed May 30, 2012 1:14 am
Forum: Ford
Topic: Newbie require info on eec v
Replies: 2
Views: 6650

The RS uses the KQTH7 strategy which is, AFAIK, only used by the Focus RS. No other 2.0l zetec definition will be of use.

I'm not aware of any definition available for this ecu.
by dex
Fri Mar 30, 2012 11:06 pm
Forum: Feature Suggestions
Topic: Checksum of Received Data
Replies: 2
Views: 6401

Can you not add the checksum as an ADX item and log it with the other parameters?
by dex
Wed Feb 29, 2012 10:55 pm
Forum: Ford
Topic: how to create a definition file?
Replies: 9
Views: 27388

You need to disassemble it, Bill Lawrence's disassembler can be found here http://autos.groups.yahoo.com/group/EEC ... r%20tools/
by dex
Wed Feb 29, 2012 12:49 am
Forum: Ford
Topic: how to create a definition file?
Replies: 9
Views: 27388

It looks like the ecu is from a diesel, strategy VHAE9.

To create a xdf you need to disassemble the code to figure out where (and what!) the parameters are. Once you have done that you can create your definition, see the TunerPro help section 'Editing Bin Definitions' on how to do this.