Table is now locked and I cannot edit it

Report bugs found in TunerPro. Please be sure to include as much info as possible, including system specs, OS, repro steps and TunerPro version number.

Moderators: Mangus, robertisaar, dex

Post Reply
Charon9
Posts: 4
Joined: Sat Aug 13, 2016 10:28 am

Table is now locked and I cannot edit it

Post by Charon9 » Sun Aug 28, 2016 11:17 am

Did a LOT of little changes to an ARAP bin.
Fans, ignore EGR, spark tables, fuel calc's etc.

One of the changes I made was to bring the idle up just a little, because of the injector size that is not working well. Went back to tinker with the idle tables some and it won't edit the tables. I change the IDLE vs COOLANT TEMP: 650.00 to (anything below) and tell it save, it won't save.
Got to looking at the info on the bottom of the window for the table and I now see

SEL COUNT: 1 MIN 650.00 MAX 650.00 AVG 650.00

and nothing I can do will change that?

I re-opened the original BIN; was just going to go through and do a compare and such, but new bin will default to 650.00 no matter what number I put in there.
Is there a cache that is bugging me? etc..?
(PM me an email addy if you need, and I will forward the bin (No its not write protected, already checked))

Charon9
Posts: 4
Joined: Sat Aug 13, 2016 10:28 am

Post by Charon9 » Sun Aug 28, 2016 11:32 am

update(?)

I changed the table to HEX and stepped down and it started saving then.

IE:
problem entry: Idle 575.00 (dec) - won't save
Hex entry: Idle 2Eh saved (back to dec) 575.00


querk - work around ?
Something with translation of the table?

vxl67getrag
Posts: 17
Joined: Thu Apr 07, 2011 8:23 pm

Post by vxl67getrag » Tue Sep 06, 2016 2:14 pm

It sounds like that's a scalar not a table, but issue can happen with either if the min/max values in the xdf are set.

So change the xdf & save it, then try edit the bin with it!

Post Reply