03 Firebolt not showing live data

Discuss Buell tuning topics here. Request definitions, discuss parameters, etc.
Post Reply
rb70383
Posts: 3
Joined: Tue Sep 29, 2015 1:28 am

03 Firebolt not showing live data

Post by rb70383 » Tue Sep 29, 2015 1:54 am

Been out of the tuning scene for a while. Getting back into it. It will connect and download the ECM. I cant datalog, nor will it show live data. It is a registered version. I can datalog on my palm but haven't figured out how to import a palm datalog in tunerpro. Not sure what is needed to help so I can take screenshots if need be.

At first Bike wouldn't connect which was my fault. correct Com port and the "release emulation hardware". :oops:
It connects with the blue box "DA Connected" but no live data, cant TPS reset.

User avatar
Mangus
TunerPro Author
Posts: 1827
Joined: Wed Mar 19, 2003 1:49 pm

Post by Mangus » Thu Oct 08, 2015 6:56 am

Which ADX are you using? Have you downloaded the latest ADX for your ECM from the ECMSpy site? Give that a shot.
***************************************
TunerPro Author
1989 Trans Am

rb70383
Posts: 3
Joined: Tue Sep 29, 2015 1:28 am

Re: 03 Firebolt not showing live data

Post by rb70383 » Mon Jun 17, 2019 6:30 am

I completely forgot about this thread. Ended up having issues with the buelltooth adaptor. Contacted them and a replacement was sent out. Everything works as it should. :oops:

Post Reply