Tunerpro showing all zeros

Discuss Ducati tuning topics here. Request definitions, discuss parameters, etc.
Post Reply
Chinogaston
Posts: 1
Joined: Wed Apr 13, 2016 5:10 pm

Tunerpro showing all zeros

Post by Chinogaston » Wed Apr 13, 2016 5:18 pm

Good day to everyone..

Im trying to learn how to tune Ducatis using Tunerpro and have succeeded in downloading a bin file from my 59M ECU used in my 2001 Ducati S4. Ive also downloaded the xdf file from Guzzidiag to use with my bin.

When I load the files in Tunerpro however..all the values in the tables are zeros.

What am I doing wrong?

Many Thanks

User avatar
dex
The Ford Guy
Posts: 546
Joined: Thu Oct 07, 2004 6:38 am

Post by dex » Thu Apr 14, 2016 1:55 am

Have you opened the bin file in a hex editor program to check whether it is a valid read?

FreQRiDeR
Posts: 10
Joined: Wed Sep 23, 2015 11:41 am

Post by FreQRiDeR » Tue Sep 13, 2016 12:23 am

Check the xdf offset in header is correct. Also look at the bin in 2D/3D window to make sure the table addresses are correct. I've had to change these from the guzzi xdfs as the ducatis are a little different.

Post Reply