Plug-in Honda Flasher on Tunerpro RT

Discuss anything TunerPro related.

Moderators: Mangus, robertisaar, dex

Post Reply
Chatchai
Posts: 3
Joined: Sun Aug 25, 2019 3:54 am

Plug-in Honda Flasher on Tunerpro RT

Post by Chatchai » Thu Oct 17, 2019 8:52 pm

Hi everyone
I'm new here please suggest me
how can I create Plug-ins & ADX to use KKL VAG Cable for Datalogging, tracking mapping in Tunerpro RT?
seem ELM327 is work
I use Honda Flasher software with VAG KKL cable come with FTDI & K-line chip
Image

Honda flasher & Lonelec VAG KKL cable
Image
link here
https://hondaflasher.webnode.fi/
https://www.lonelec.co.uk/Motorbike-OBD ... sher-Cable

Thanks in advance
Last edited by Chatchai on Sun Jan 12, 2020 4:25 am, edited 1 time in total.

ecu tuner
Posts: 5
Joined: Mon Nov 04, 2019 7:15 am

Re: Plug-in Honda Flasher on Tunerpro RT

Post by ecu tuner » Mon Nov 04, 2019 7:26 am

hello sir good job i wantplugin for honda and yamaha flasher sent me on this mail,
topmechanic29@gmail.com

Chatchai
Posts: 3
Joined: Sun Aug 25, 2019 3:54 am

Re: Plug-in Honda Flasher on Tunerpro RT

Post by Chatchai » Sun Jan 12, 2020 4:22 am

Looks like someone has ever answered about this
"ELM327 is often used with software for standard OBD2 communication and has built-in support for most common OBD2 protocols. The software communicates with the interface using a special ELM327 protocol. For the stuff in this thread, a "passive" interface is needed. For example Vag-COM 4.09 KKL. The simplest passive interfaces will only convert the voltage level of the K-line to the RS-232 level for a PC. The cables with a USB connection will, in addition, create a virtual RS-232 port, but the result is more or less the same"
In this case, I found that ELM327 cannot communicate directly with the K-line.

I'm not sure about the protocol of Honda Bike, is it possible if there is a way to convert this K-line into a CAN bus?

anyone have any idea

Post Reply