Opening 2 instances of TunnerPro

Discuss anything TunerPro related.

Moderators: Mangus, robertisaar, dex

Post Reply
User avatar
Posts: 36
Joined: Mon Apr 07, 2008 2:04 pm

Opening 2 instances of TunnerPro

Post by daveinet »

I've had a couple of times where it would be nice to have 2 instances of TunnerPro open at the same time, but it will not allow it. I've done this a few times when I've done this with ScannerPro to fix compare/fix some of the calculations.

I've tried to do the same with TunnerPro and it will not let me. It will not let me open TunnerPro and TunnerPro RT at the same time. There have been a few times when I wanted to compare XDF definitions to correct some things that didn't work right.

The BIN compare is useful, but I've also ran into a situation where I wanted to see both the original table and the compare table at the same time. My memory is pretty short, so when flipping back and forth between compare and the original, I keep forgetting what I was seeing. Am I just getting old, or do others run into that as well?
502 Edelbrock/Howell MPFI Thorleys and Magnaflows - in a 13Klbs motorhome!

"There are 10 types of people in the world, those who understand binary and those who don't"

User avatar
Posts: 590
Joined: Sun May 06, 2007 7:32 am

Post by Six_Shooter »

Post Reply