FAQFAQ SearchSearch MemberlistMemberlist UsergroupsUsergroups RegisterRegister
ProfileProfile Log in to check your private messagesLog in to check your private messages Log inLog in

 
Multiple Addresses for a single Scalar

 
Post new topic   Reply to topic    TunerPro User Forum Forum Index -> Ford
 
ironmanisanemic



Joined: 29 Dec 2015
Posts: 3

PostPosted: Tue Dec 29, 2015 8:21 pm    Post subject: Multiple Addresses for a single Scalar Reply with quote

Hello,

I am currently helping to fix the CDAN4 XDF over on Decipha's site, and i ran into a snag.

Im not well versed in def creation especially with tunerpro. So correct me if this cannot be done.

In the CDAN4 strat, there are scalars that have the same value located in multiple spots where they need to be changed together. I know in a different program i can just add all of the addresses seperated by a comma and i was good. In TP i havent figured out how to do this same thing. If i add more than one address it doesnt lookup properly.

Hopefully it is something simple i have overlooked, and i did try searching, and looking at the help files within TP with no luck.

Thank you
Back to top
View user's profile Send private message
 

 
dex
The Ford Guy


Joined: 07 Oct 2004
Posts: 522

PostPosted: Tue Dec 29, 2015 10:54 pm    Post subject: Reply with quote

You need to create a scalar for each memory address.
Back to top
View user's profile Send private message
 

 
ironmanisanemic



Joined: 29 Dec 2015
Posts: 3

PostPosted: Wed Dec 30, 2015 2:17 pm    Post subject: Reply with quote

So there is no trick to having more than one address modified under 1 scalar? Otherwise for something like the SARCHG (CID displacement) there are 7 references (that i know of) to the same value in the bin. It would suck to have to enter the same value 7 times. If there is no way, then i can live with it, but it just sucks.
Back to top
View user's profile Send private message
 

 
dex
The Ford Guy


Joined: 07 Oct 2004
Posts: 522

PostPosted: Thu Dec 31, 2015 12:29 am    Post subject: Reply with quote

There's no way of doing it that I'm aware of. If you think SARCHG is a hassle wait until you find others like NUMEGO with 40 plus locations.
Back to top
View user's profile Send private message
 

 
ironmanisanemic



Joined: 29 Dec 2015
Posts: 3

PostPosted: Fri Jan 01, 2016 1:52 pm    Post subject: Reply with quote

Yeah that really sucks. Im mainly trying to cleanup the XDF so its usable and easier to find things. I dont know Ford Assembly so im only going by whats in the free XLS for BE. It looks like it was ported over initially but then abandoned. Would i be able to enlist your help in developing this def further?
Back to top
View user's profile Send private message
 

 
dex
The Ford Guy


Joined: 07 Oct 2004
Posts: 522

PostPosted: Fri Jan 01, 2016 11:16 pm    Post subject: Reply with quote

Sorry, no, I already have too many other things that occupy my time.
Back to top
View user's profile Send private message
 

Display posts from previous:   
View previous topic :: View next topic  
Post new topic   Reply to topic    TunerPro User Forum Forum Index -> Ford All times are GMT - 9 Hours
 
Page 1 of 1
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
 


Powered by phpBB © 2001, 2002 phpBB Group
RedSquare theme 1.0.3 © DoubleJ(Jan Jaap)