Datalogging problem

Discuss anything TunerPro related.

Moderators: Mangus, robertisaar, dex

Post Reply
jgarner
Posts: 7
Joined: Fri Sep 11, 2015 8:02 pm

Datalogging problem

Post by jgarner » Tue Sep 13, 2016 4:55 pm

Trying to datalog my 91 s10 with 94 4.3 4l60 7427 swap. I'm using od_tpv5_v250.xdf and a217 $od tp5 v250.adx. When I connect koeo all data is good but as soon as I start the engine I get more data errors than good data and if I drive it eventually the data just stops. I have tried adding a pause to the adx but nothing I've tried has worked. Today I tried a218_od_trans2_v250.adx and it connected engine running with no errors. Also I have a scan tool that will connect and show live data just doesn't have the ability to record. Any help is greatly appreciated.

Post Reply