FAQFAQ SearchSearch MemberlistMemberlist UsergroupsUsergroups RegisterRegister
ProfileProfile Log in to check your private messagesLog in to check your private messages Log inLog in

 
Data Acquisition for Lancia Lancia_v1.adx

 
Post new topic   Reply to topic    TunerPro User Forum Forum Index -> Other Car/Truck Makes
 
zioweb



Joined: 25 Jul 2010
Posts: 17

PostPosted: Sat Sep 04, 2010 11:20 pm    Post subject: Data Acquisition for Lancia Lancia_v1.adx Reply with quote

Hi all,
I've downloaded from the tunerpro site the file Lancia_v1.adx and want to use it on a Coupè 2.0 16v turbo.
How can I interface the PC to the ECU for Data aquisition?
I need a particular ALD interface?

Thanks Smile
_________________

Power On The Road Equipped

...I always do by myself...
Back to top
View user's profile Send private message MSN Messenger
 

 
hnracing



Joined: 30 May 2010
Posts: 23

PostPosted: Sat Sep 11, 2010 7:51 am    Post subject: Reply with quote

Do a search on ebay for
"obd2 usb vag kkl" and
"Fiat Lancia Alfa RomeoOBD2 Diagnostic adapter "
BR
Back to top
View user's profile Send private message
 

 
rob



Joined: 25 Mar 2007
Posts: 15

PostPosted: Sun Sep 12, 2010 8:27 am    Post subject: Reply with quote

Currently this Adx expects only one Byte in Return! All the KKL Interfaces i've seen echo the sent data! So you will very likely get garbage.
Solution 1: Modify the KKL Adapter.
Solution 2: Modify the ADX and send it to Mark with a different name (Lancia_v1_KKL.adx for Example).
ROB
Back to top
View user's profile Send private message
 

 
hnracing



Joined: 30 May 2010
Posts: 23

PostPosted: Sun Sep 12, 2010 10:36 am    Post subject: Reply with quote

Just go
Acqusition ->Edit definition ->ADX Header Data
- check the box for "RS232 Echo"
Save
Done!
Back to top
View user's profile Send private message
 

 
zioweb



Joined: 25 Jul 2010
Posts: 17

PostPosted: Sun Sep 12, 2010 11:18 am    Post subject: Reply with quote

thank U very much for the explanation, this sounds very good to me because I have the kkl interface and the 3 pin adapter Smile

thank U very much!

Smile
_________________

Power On The Road Equipped

...I always do by myself...
Back to top
View user's profile Send private message MSN Messenger
 

 
maxim



Joined: 04 Sep 2011
Posts: 10

PostPosted: Tue Apr 29, 2014 12:41 am    Post subject: Reply with quote

dear friend I know this topic very old.
I need some help about marelli P8 ecu.
I can not connect over tunerpro5 with Lancia_v1_1.adx to ecu.

4W6/P8 alfaromeo 155Q4 ecu (like lancia 16V)
-I have original lancia tester diagnostic, its work well
-Im registered tunerpro user and I have ostrich 2.0 emulator, its work well
-I have 409.1 KKL usb interface and 3 pin fiat cable,
its work well with startrek software on notebook from "nailed barnacle"

finally evey devices are working but Lancia_v1_1.adx NOT.

Im set it correct com port in configure menu com6
but tunerpro give me an error when I test.
"TEST FOR VALID INTERFACE USING SETTING" -> cable not found or not functioning.
Back to top
View user's profile Send private message
 

 
midnight_man



Joined: 13 Jan 2015
Posts: 6

PostPosted: Sat Jun 03, 2017 2:31 am    Post subject: Reply with quote

anybody tried this adx with elm327?

Thanks
Back to top
View user's profile Send private message
 

Display posts from previous:   
View previous topic :: View next topic  
Post new topic   Reply to topic    TunerPro User Forum Forum Index -> Other Car/Truck Makes All times are GMT - 9 Hours
 
Page 1 of 1
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
 


Powered by phpBB © 2001, 2002 phpBB Group
RedSquare theme 1.0.3 © DoubleJ(Jan Jaap)