Explain Fuel Error

Discuss anything TunerPro related.

Moderators: Mangus, robertisaar, dex

Post Reply
User avatar
yeastieBoB
Posts: 3
Joined: Fri Dec 22, 2017 4:42 pm

Explain Fuel Error

Post by yeastieBoB » Sat Dec 23, 2017 6:38 am

Howdy all. I just joined the forum. I'm in the early stages of my first tune, and so far I really like TunerPro.

I'd like to get a better understanding of what the Fuel Error gauge represents. I did a search in TunerPro's help topics, but didn't find anything. A search on the forum returned over 700 topics.

Where's a good place to see information on what each dash gauge means?
'93 Mustang coupe, rebuilt stock internal 302, 82 MAF, 75 TB, Victor 5.0, High Ports, 80# inj., 255 FP, B303, 1.6s, Tremec TKO, 4.10s, full exhaust, Moates QH/TunerPro RT/X3Z/A9L2/GUFX. Mostly untuned went 12.68 @ 111.69

User avatar
yeastieBoB
Posts: 3
Joined: Fri Dec 22, 2017 4:42 pm

Post by yeastieBoB » Sat Dec 23, 2017 7:07 am

Ok, so it looks like the ADX Editor has descriptions for each value.

For Fuel_Error it says "This can be considered a multiplier which would correct the fueling if it had been applied when in closed loop ONLY."

Is there a place where I can export/print these descriptions so I can highlight, make notes, etc.?
'93 Mustang coupe, rebuilt stock internal 302, 82 MAF, 75 TB, Victor 5.0, High Ports, 80# inj., 255 FP, B303, 1.6s, Tremec TKO, 4.10s, full exhaust, Moates QH/TunerPro RT/X3Z/A9L2/GUFX. Mostly untuned went 12.68 @ 111.69

Post Reply