Help with 89 Ford probe GT

Discuss Ford tuning topics here. Request definitions, discuss parameters, etc.

Moderators: robertisaar, dex

Post Reply
ant_evo
Posts: 3
Joined: Sun Aug 02, 2009 7:39 pm

Help with 89 Ford probe GT

Post by ant_evo » Sun Aug 02, 2009 8:32 pm

What I have is a modified bin file and a stock bin,,,,, All I have now a cheap ass eprom programmer... I only no how to copy and burn a eprom,,, But want help to try to tune my car,,,,,, The modified bin file I have is supposed to have the ability to run 440cc injectors and adjusted Fuel and Timing and Boost Cut disabled...... The Mazda mx-6 turbo 88-92 and Ford Probe 89-92 share the same ECU,,,,,,,,,,,,
THANKS,,,,,,,,
MODIFIED EPROM
http://www.mediafire.com/?ljx9e7yevum

STOCK EPROM
http://www.mediafire.com/?sharekey=af0d ... f6e8ebb871

User avatar
DolceHawtie
Posts: 2
Joined: Thu Aug 20, 2009 11:49 am

Post by DolceHawtie » Thu Aug 20, 2009 11:52 am

check your pm...i sent you some good info
Kiss me and i'll see stars ...love me and i'll give them to you!

hoursetraitor
Posts: 15
Joined: Sat May 14, 2011 1:36 pm

Post by hoursetraitor » Sun May 15, 2011 2:21 pm

DolceHawtie wrote:check your pm...i sent you some good info
i could use that same info. i dont want a probinator chip so im exploring stuff. since theres not alot of support for these cars anything is appreciated

User avatar
eddieDSM
Posts: 4
Joined: Sat Oct 04, 2008 12:32 am

F2T 92 XDF Help!

Post by eddieDSM » Thu Jun 09, 2011 5:07 am

I need also some help with this XDF (92 Ford Probe 2.2T)!

We need to tweak the injector compensation (global) and the revlimit!

Can someone help with the addresses and the calculations?
THX!
DolceHawtie wrote:check your pm...i sent you some good info
91 Galant VR-4

hoursetraitor
Posts: 15
Joined: Sat May 14, 2011 1:36 pm

Re: F2T 92 XDF Help!

Post by hoursetraitor » Thu Jun 09, 2011 2:55 pm

I know someone made chips for these cars, theres 3-5 versions so someone had the means to read the chip and change it. Its one of the things i hate about my probe aside from the fact no one realizes its a mazda 626/mx6 turbo ecu and not ford.
eddieDSM wrote:I need also some help with this XDF (92 Ford Probe 2.2T)!

We need to tweak the injector compensation (global) and the revlimit!

Can someone help with the addresses and the calculations?
THX!
DolceHawtie wrote:check your pm...i sent you some good info

californieca
Posts: 2
Joined: Fri May 13, 2011 6:54 am

Post by californieca » Mon Dec 28, 2015 7:46 am

Hello,
can you send me these files:
hacv_10@abv.bg

Thanks in advance.

Greetings.

Tsvetomir Hristov

Post Reply