FAQFAQ SearchSearch MemberlistMemberlist UsergroupsUsergroups RegisterRegister
ProfileProfile Log in to check your private messagesLog in to check your private messages Log inLog in

 
Low Offset Values (RPM, TPS, etc) not Working

 
Post new topic   Reply to topic    TunerPro User Forum Forum Index -> Ford
 
Montana Steve



Joined: 13 Mar 2011
Posts: 2

PostPosted: Sun Mar 13, 2011 1:58 pm    Post subject: Low Offset Values (RPM, TPS, etc) not Working Reply with quote

I've just started with TunerPro RT using a Quarterhorse interface to a A9P EEC-IV in my 92 Mustang GT with an automatic transmision. Most everything seems to be well for a first attempt but the values with low offsets only give incorrect static readings.

Here's what I've done:
1. Download A9P.bin and GUF1.xdf from the Moates website.
2. Pad 56K bin file to 64K using the TunerPro bin stacker.
3. Opened A9P.bin and GUF1.xdf in TunerPro RT and load bin onto the QH.
4. Loaded GUFB.adx definition file.

I searched for a GUF1 adx file but couldn't find one so I found a GUFB.adx file and decided to try it. I've searched extensively but need some help in figuring out how to get everything working. I can't seem to find anything to verify the offsets for the values are correct and the command strings in the adx file are still greek to me.

If it helps troubleshoot, I get the following static readings:
TPS @ offset 0x05 reads 2.56
RPM @ offset 0x07 reads 4096
Engine Coolant Temp @ offset 0x09 reads 2.00
Air Charge Temp @ offset 0x0A reads 128

Thanks for any assistance.
_________________
Montana Steve
92 Mustang GT Automatic
Stock Engine, 3.55 gears, rebuilt AOD w/ shift kit and 2300rpm stall converter.
Quarterhorse interface
Back to top
View user's profile Send private message
 

 
Montana Steve



Joined: 13 Mar 2011
Posts: 2

PostPosted: Sun Mar 27, 2011 4:24 pm    Post subject: Reply with quote

I sent an email to Moates support and Craig replied to use the files for the manual transmission instead. After they assured me that the A9L binary wouldn't harm the car I followed their advice. All seems well and I can monitor everything now.

Here's the link they provided:
http://www.moates.net/zips/tprt_ford/
_________________
Montana Steve
92 Mustang GT Automatic
Stock Engine, 3.55 gears, rebuilt AOD w/ shift kit and 2300rpm stall converter.
Quarterhorse interface
Back to top
View user's profile Send private message
 

Display posts from previous:   
View previous topic :: View next topic  
Post new topic   Reply to topic    TunerPro User Forum Forum Index -> Ford All times are GMT - 9 Hours
 
Page 1 of 1
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
 


Powered by phpBB © 2001, 2002 phpBB Group
RedSquare theme 1.0.3 © DoubleJ(Jan Jaap)