Need some help understanding an error.

Discuss Buell tuning topics here. Request definitions, discuss parameters, etc.
Post Reply
User avatar
LarsRoug
Posts: 2
Joined: Wed Aug 24, 2011 10:00 am

Need some help understanding an error.

Post by LarsRoug » Sat Sep 10, 2011 5:31 am

Hello,
I am using TunerPro for my buell 1125R 2008, and when I am reading the ECM, I get some errors on the pages 14 and 15 by the look of the logfile. Can anyone explain for me why this is happening and if there is something I can do to fix this?
I have not dared to do any tuning yet when not being sure it's fully working and not faulty.

This is from the logfile:

Serial Device: COM1
ECM Type: "BUEZD0P0 12-17-08"
Data will be written to file
"C:\Program Files\EcmRead_Mono\nytt\BUEZD0P0 12-17-08_20110824-203118.xpr"
Open serial device COM1.
Read type from ECM: "BUEZD0P0 12-17-08"
Close serial device COM1.
Open serial device COM1.

Read ECM: page 1 fully read.

(-Everything looks fine so far-)

Read ECM: page 13 (256 bytes) done.
SendRequest(): Error: response is not ACK: 0x15
SendRequest(): Error: invalid request/address error
SendRequest(): Error: response is not ACK: 0x15
SendRequest(): Error: invalid request/address error
Read ECM: premature end of page 14.
Read ECM: page 14 (44 bytes) done.
SendRequest(): Error: response is not ACK: 0x15
SendRequest(): Error: invalid request/address error
Read ECM: page 15 (0 bytes) done.
Read ECM: reading XData.
SendRequest(): Error: response is not ACK: 0x15
SendRequest(): Error: invalid request/address error
Read ECM: end of XData.
Read ECM: XData (40 bytes) done.
Close serial device COM1.
Read ECM: got EEPROM data (3412 bytes).


Thankfull for any input or help that I can get regarding this issue, I am a noob when it comes to tuning buell's :)

Best Regards, Lars R. Sweden

User avatar
Mangus
TunerPro Author
Posts: 1825
Joined: Wed Mar 19, 2003 1:49 pm

Post by Mangus » Wed Sep 28, 2011 8:09 pm

Sorry for the delay, but the log output appears to be from ECMRead, not from TunerPro. Have you contacted Gunthar, its author (www.ecmspy.com)?
***************************************
TunerPro Author
1989 Trans Am

Xoptimizedrsx
Posts: 5
Joined: Sat Oct 02, 2010 9:25 am

Post by Xoptimizedrsx » Wed May 16, 2012 3:16 pm

This error is known and its false data.

Just add the rear/write plug in to Tunerpro Rt and use that now everything is in an all in one program for you.

User avatar
LarsRoug
Posts: 2
Joined: Wed Aug 24, 2011 10:00 am

Post by LarsRoug » Fri Jul 13, 2012 7:14 am

Hello!
If I should use Tunerpro RT should I use XPR file for release 4 or 5? Tunerpro RT or tunerpro? they differ.

Post Reply