I have been building definition file for my (European) Ford Escort Special -94 which has Zetec engine... ECU's Catch Code is ENVY (EEC-IV). I think strategy for this Definition is called "GSAZ1".
I have in my mind to build more definition files about Zetec engines. Next will be GSBA0 which is much more commonly used with Zetec engines and i have one EEC-IV ECU which uses it.
The Definition File was first build on dex's GUFB -file. He gave me a permission to use that file as a getting start so my personal Thanks to him.
Special Anonymous thanks goes everyone who is worked or spend time on these and shared data or knowledge for everyone on internet.
Please first in TunerPRO go "tab" XDF -> "View/Edit XDF Header Info" and read that.
*****************
GSAZ1.xdf Version 1.0 *Updated -09.07.2014
*Rip* ENVY.bin -64K *NOTE I didn't use J3 port. I used DCL.
*****************
"ENVY" "AGED" "3AAB" "GURU"
.xdf is like text file so you need click on that link with mouse right button and select "save as..."
*****************
GSBA0.xdf Version 0.2 *Second Release! -08.08.2014
*Rip* SEAL.bin -56K
*****************
"SEAL" "ACHE" "BLOB" "BLIP" "DESK"
.xdf is like text file so you need click on that link with mouse right button and select "save as..."
There is not yet much but i use my time more for this if someone needs this.
*****************
92ED1.xdf Version 0.2 *Second Release! -08.08.2014
*Rip* 2FCD.bin -56K
*****************
"2FCD" "2FDC" "2FBC"
.xdf is like text file so you need click on that link with mouse right button and select "save as..."
There is not yet much but i use my time more for this if someone needs this.
Help / tips are welcome.
-23.8.2013-
Sorry for progress delay but I am now trying to make J3 Adapter by myself because i think i am done enough to test Definition file in real life. And i dont really like moates desing of F3 memory Adapter enough.

-30.8.2013-
I made own reader. Did read another ecu which i had. Catch code is 3AAB. It looks like working fine with that too. Updates comes when i get to test tuning IRL.

I think strategy for this Definition is called "GSAZ1"
-17.9.2013-
I am happy to see some views but still not yet ready on J3 Adapter. Just need get parts. BTW after this i think i'll make others Escort Zetec ecus definition. I have *.bin for 2FCD (105HP 1.8l) and 2FDC (130HP 1.8l) because i am making 1.8l engine swap and tuning on that more than this i'll make those two at least.
-29.10.2013-
China Air mail.... Too slow... Where is my pcb.
-04.12.2013-
Ok. Now i have working J3 adapter. Maybe this will progress more soon...?
-04.03.2014-
Very sry about delay. I have had another things in my life but maybe i will now make my own last version of J3 adapter and progress then.
-25.03.2014-
New Version! Share happily. Improve.. what ever.
-03.05.2014-
New Version coming soon later and Lots of stuff! After 9 months of learning and making Definition from a scratch i am gonna finally try it by myself. Just after i get my knock meter via post. : D
-14.05.2014-
New Version Uploaded! Some big mistakes corrected too.
-09.07.2014-
V1.0 GSAZ1 Version Uploaded! Some small mistakes corrected by testing and others added. There is still some which still need 'a look'.
added:
*DASMIN/DASMPH Scalars for idle
*(Main) Decel Fuel Shut Off scalars
*Repetitive Spark scalars and Enable Switch (a bit like MSD for idle)
*... I don't remember what was missing previous one.. but a lot.
-26.07.2014-
92ED1 Definition for couple older Zetecs. I don't know what uses what strategy so can't name all those.
-26.07.2014-
92ED1 and GSBA0 Definitions added couple little things...