FAQFAQ SearchSearch MemberlistMemberlist UsergroupsUsergroups RegisterRegister
ProfileProfile Log in to check your private messagesLog in to check your private messages Log inLog in

 
Issues (now fixed) when changing from J3 chip to Quaterhorse

 
Post new topic   Reply to topic    TunerPro User Forum Forum Index -> Ford
 
289Hilux



Joined: 12 Jul 2017
Posts: 1

PostPosted: Sat Dec 09, 2017 10:19 pm    Post subject: Issues (now fixed) when changing from J3 chip to Quaterhorse Reply with quote

I am using EECIV from a EB 5.0L Falcon ( here in Aus)

I am running a 289 Windsor. I was using a J3 chip with a modified tune, mainly to change the injector firing order and turn of the Smart Lock.

I saved the tune from my chip with Tuner Pro RT, as I have done many times before.

I installed the Quaterhorse in to my ECU, downloaded the Bin etc, then turned on the key the fuel pumps now run continuously, they used to run 3sec then stop until I cranked it.

I have 48psi of fuel pressure but it won�t run, it will almost fire then nothing, each time I turn of the key it will almost fire but will not run.

I checked the plugs, they are dry. I do have spark.

Any Thoughts

I have figured it out:
Trimmed the bin to 57k
Modified the XDF: bin size E000
Base offset 2000 ticked the subtract box
Works a treat, just need to work on a ADX for logging.
Back to top
View user's profile Send private message
 

Display posts from previous:   
View previous topic :: View next topic  
Post new topic   Reply to topic    TunerPro User Forum Forum Index -> Ford All times are GMT - 9 Hours
 
Page 1 of 1
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
 


Powered by phpBB © 2001, 2002 phpBB Group
RedSquare theme 1.0.3 © DoubleJ(Jan Jaap)