FAQFAQ SearchSearch MemberlistMemberlist UsergroupsUsergroups RegisterRegister
ProfileProfile Log in to check your private messagesLog in to check your private messages Log inLog in

 
Launch control for 506 bin. WORKING

 
Post new topic   Reply to topic    TunerPro User Forum Forum Index -> Bosch
 
evilm3666



Joined: 09 Nov 2011
Posts: 72

PostPosted: Thu Jan 16, 2014 7:03 am    Post subject: Launch control for 506 bin. WORKING Reply with quote

I got launch control / 2 step rev limiter working for the 506 bin.
It will be easy to change the rpm settings and to enable or disable in Tunerpro. I just need to finish up a 506 xdf file for N/A cars. It will be for the 506 chip #965.

I will send out the xdf and a stock bin modified with the launch control.
Anyone that wants it pm me your email and I will send it as soon as I am finished with the xdf. Twisted Evil I will also make sure it gets posted in the download section
Back to top
View user's profile Send private message
 

 
evilm3666



Joined: 09 Nov 2011
Posts: 72

PostPosted: Tue Feb 04, 2014 11:07 am    Post subject: Reply with quote

The 506 xdf file is finished. It has working launch control, the load and rpm axis are auto correcting so if you open up a bin that had any of the rpm break points changed it will auto correct in Tunerpro for correct break point viewing. I also corrected any tables that are load based like the VANOS min & max.
Email me your address if you need a copy
Back to top
View user's profile Send private message
 

 
norbi



Joined: 27 Mar 2014
Posts: 4

PostPosted: Sun Mar 30, 2014 7:00 am    Post subject: Reply with quote

Thanks for sending! I hope this could help to do the same in 413 m50b25.
Back to top
View user's profile Send private message
 

 
alimehrem



Joined: 05 Oct 2014
Posts: 6

PostPosted: Fri Oct 17, 2014 6:00 am    Post subject: Reply with quote

Any launch control for 413 dme ?
Back to top
View user's profile Send private message
 

 
evilm3666



Joined: 09 Nov 2011
Posts: 72

PostPosted: Sun Oct 19, 2014 5:06 am    Post subject: Reply with quote

No the launch control only works on the 413 silver label and the 506. The launch control is really just a fuel cut rev limiter that is based on vehicle wheel speed. The 413 red label does not have this type of rev limiter. You can just use the 506 bin file in your currant DME.
Back to top
View user's profile Send private message
 

 
VRP



Joined: 09 Apr 2015
Posts: 2

PostPosted: Thu Apr 09, 2015 5:50 am    Post subject: Reply with quote

hello,nice work people Smile can you send me also the launch control file with xdf,please?
Back to top
View user's profile Send private message
 

 
evilm3666



Joined: 09 Nov 2011
Posts: 72

PostPosted: Thu Apr 16, 2015 4:20 am    Post subject: Reply with quote

Please pm me you email address if you have not yet.
Back to top
View user's profile Send private message
 

 
euronation



Joined: 28 May 2015
Posts: 1

PostPosted: Thu May 28, 2015 10:38 pm    Post subject: Reply with quote

I set up launch control, probably around the same time you were working on this. My car was hit shortly after and a ditched the project. I used a little different trick though.

Change the map header to D7, coolant temp. Then set the break point scale for the rev limiter map to a reaonable set of temps except the final value; set it to something you shouldn't ever hit but wouldn't throw off your fueling if you did... say 250F.

Wire up an SPDT relay as shown here https://lh5.googleusercontent.com/-vk7P9cmAx8k/VWgV76GAx8I/AAAAAAAAAJw/7kIR93cAR0A/w1038-h496-no/launch.jpg

Push button, receive launch control (and possibly flat shift). I never tried altering the engine temp timing correction to pull timing and engine temp enrichment to add fuel... not sure how it would work with the fuel cut but if all goes to plan you'd have antilag on a factory DME.

Now if someone could just tell me how to shut off the VSS to kill the VSS fault rev limiter on my track car.
Back to top
View user's profile Send private message
 

 
tason423



Joined: 14 Sep 2014
Posts: 2

PostPosted: Sun Dec 25, 2016 10:04 pm    Post subject: Re: Launch control for 506 bin. WORKING Reply with quote

evilm3666 wrote:
I got launch control / 2 step rev limiter working for the 506 bin.
It will be easy to change the rpm settings and to enable or disable in Tunerpro. I just need to finish up a 506 xdf file for N/A cars. It will be for the 506 chip #965.

I will send out the xdf and a stock bin modified with the launch control.
Anyone that wants it pm me your email and I will send it as soon as I am finished with the xdf. Twisted Evil I will also make sure it gets posted in the download section


My email: tason423@gmail.com
Back to top
View user's profile Send private message
 

 
evilm3666



Joined: 09 Nov 2011
Posts: 72

PostPosted: Thu Dec 29, 2016 9:44 am    Post subject: Reply with quote

tason423 files sent.
Back to top
View user's profile Send private message
 

 
ikamac



Joined: 15 Nov 2016
Posts: 1

PostPosted: Mon Jan 02, 2017 11:04 pm    Post subject: Reply with quote

please send me too
ikamac@gmail.com
Back to top
View user's profile Send private message
 

 
Brian Shor



Joined: 06 May 2011
Posts: 28

PostPosted: Sat Jan 14, 2017 4:43 am    Post subject: Reply with quote

Tason423,
I know you had asked me for a high horse power bin for the 413. I have reservations because I sent it to someone last year that put it to a S50B30 USA with stock connecting rods and he ended up hurting the motor. I can send you a bin with about 350hp and you can work from there.
Back to top
View user's profile Send private message
 

 
Brian Shor



Joined: 06 May 2011
Posts: 28

PostPosted: Sat Jan 14, 2017 8:57 am    Post subject: Reply with quote

Tason423,
I sent BIN to your email. S50B30US stock, 29lb/hr injectors, Garret 0.50front 0.63back, 90 octane AKI, 10psi boost, 3" AFM, 344whp, 365ft/lb.
This is a safe hp to start with, going over 400hp I would advise upgraded rod & pistons

You can use EvilM3666's xdf (506chip965) it works for 413
Back to top
View user's profile Send private message
 

 
tason423



Joined: 14 Sep 2014
Posts: 2

PostPosted: Fri Feb 17, 2017 11:06 pm    Post subject: Reply with quote

Brian Shor wrote:
Tason423,
I sent BIN to your email. S50B30US stock, 29lb/hr injectors, Garret 0.50front 0.63back, 90 octane AKI, 10psi boost, 3" AFM, 344whp, 365ft/lb.
This is a safe hp to start with, going over 400hp I would advise upgraded rod & pistons

You can use EvilM3666's xdf (506chip965) it works for 413


Thanks you so much.
Back to top
View user's profile Send private message
 

Display posts from previous:   
View previous topic :: View next topic  
Post new topic   Reply to topic    TunerPro User Forum Forum Index -> Bosch All times are GMT - 9 Hours
 
Page 1 of 1
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
 


Powered by phpBB © 2001, 2002 phpBB Group
RedSquare theme 1.0.3 © DoubleJ(Jan Jaap)