Cell values from .xdf to hptuners

Discuss anything TunerPro related.

Moderators: Mangus, robertisaar, dex

Post Reply
WarShrike
Posts: 1
Joined: Mon Sep 18, 2017 10:09 am

Cell values from .xdf to hptuners

Post by WarShrike » Mon Sep 25, 2017 11:27 am

Hi guys,

Working on building tables for a setup right now that has them available on one vehicle model, but not this one. I can open both tunes and compare them directly, but some tables have only one cell vs. 10 that I can use (and dearly need).

Can build the tables and they import into hptuners new User Defined Functions, but the cells are full of useless values that I cannot change to what I need specifically.

While messing with things, if I change the hex address for the table, the values in the cell change. I can scale the entire table by adding a formula in the conversion tab, but that gets maybe one cell out of many at the value that I need.

Does this mean I need the specific hex addresses for those tables?

Post Reply