How to get cable to work with TunerPro??

Discuss anything TunerPro related.

Moderators: Mangus, robertisaar, dex

Post Reply
SHAWN77371
Posts: 1
Joined: Mon Mar 26, 2018 7:20 pm

How to get cable to work with TunerPro??

Post by SHAWN77371 » Mon Mar 26, 2018 7:45 pm

Hello All,
Ok so im very new to Tuner Pro.. I bought a OBD2 MAOZUA USB ELM327 and i cant seem to get Tuner Pro to recognize the hardware cable so i can use the software..

you can view the cable here
https://www.amazon.com/gp/product/B0725 ... UTF8&psc=1

I bought a used 2002 mazda protege5 as a play car and a few days ago on a cold crank it spits and sputters the RPM'S will go up to about 2,000 then just drop and stall out on me..

After the car gets to temp it runs just fine.

I have checked for vacuum leak's and tested the solenoids and valves and cant find anything and it dont spit any codes so i need the software where i can get some better insights on whats going on..

Also is there a place where i can get the bin and adx files so i can tweak it better to my taste??

Post Reply