Crash course me on EEC-IV A3M

Discuss Ford tuning topics here. Request definitions, discuss parameters, etc.

Moderators: robertisaar, dex

Post Reply
Mykk
Posts: 99
Joined: Sat Sep 05, 2015 8:28 am

Crash course me on EEC-IV A3M

Post by Mykk » Fri May 24, 2019 4:18 pm

Welcoming all tuning and theory links regarding A3M ecu. Quarterhorse in a Foxbody 1993 Mustang 5.0 manual trans. Thank you!

Mykk
Posts: 99
Joined: Sat Sep 05, 2015 8:28 am

Re: Crash course me on EEC-IV A3M

Post by Mykk » Sat May 25, 2019 4:47 am

I see the GUFB.xdf, I also found A3M.bin's online. I've also added 8k of blank data in front of the 56k A3m bin to make it a 64kb file and align the table addresses to match the GUFB.xdf, do I need to remove the 8k of blank data on a modified .bin before loading the .bin to the quarterhorse to run on the A3m ecu?

User avatar
decipha
Posts: 50
Joined: Thu May 02, 2013 12:20 pm
Location: New Orleans, LA

Re: Crash course me on EEC-IV A3M

Post by decipha » Mon Jun 03, 2019 5:36 am

thats all outdated stuff

http://www.efidynotuning.com/

click on downloads

you can use the a9l2 on all the foxbody ecu's

http://www.efidynotuning.com/a9l2.htm

Post Reply