Issues loading XDF for BMW MSS54 HW2101

Discuss Bosch (Porsche, BMW, Volvo, etc) tuning topics here. Request definitions, discuss parameters, etc.

Moderators: robertisaar, dex

Post Reply
Speedyweber
Posts: 2
Joined: Thu Aug 15, 2019 7:33 am

Issues loading XDF for BMW MSS54 HW2101

Post by Speedyweber » Thu Aug 15, 2019 7:43 am

I have downloaded the XDF files from github for MSS54, and only a few of them will load in Tunerpro, and of course the one I need to load (hw2101) gives me an error message.

"error parser does not support utf-8 language encodings"

Only three of the files available on github will load without this error message (hw0301, hw0401, hw1301). Any help in solving this issue would be greatly appreciated. I'm sure it's probably a simple fix since other XDFs load but I'm not coding savvy.

olafu
Posts: 140
Joined: Tue Jul 26, 2016 12:35 pm
Location: Finland

Re: Issues loading XDF for BMW MSS54 HW2101

Post by olafu » Thu Aug 15, 2019 9:59 am

Try to open that XDF with notepad. If it doesn't look like normal XDF file, you must download it again, but don't right-click and save as.. Try to download it in ZIP-packet. I don't know right way, but at least raw copy-paste from github works...

Speedyweber
Posts: 2
Joined: Thu Aug 15, 2019 7:33 am

Re: Issues loading XDF for BMW MSS54 HW2101

Post by Speedyweber » Thu Aug 15, 2019 5:41 pm

That worked. I should have thought about the download method causing the issue. Thanks for the help.

Post Reply