tunerpro wont open

Report bugs found in TunerPro. Please be sure to include as much info as possible, including system specs, OS, repro steps and TunerPro version number.

Moderators: Mangus, robertisaar, dex

Post Reply
sodak66
Posts: 1
Joined: Thu Dec 26, 2019 8:01 am

tunerpro wont open

Post by sodak66 »

Hello all, I've just installed tunepro rt on my windows 10 computer and when I try to open it the tunerpro icon pops up but says no hardware found and fails to open? Any ideas why? the download did finish and I didn't get any errors on the install so i'm lost.

davidfoti
Posts: 1
Joined: Mon May 18, 2020 12:07 pm

Re: tunerpro wont open

Post by davidfoti »

I am having the same issue. I had an older version on a Windows XP laptop and had a motherboard failure. Now I am on a Dell M4600 with Windows 10 and the latest TunerPro. When I try to open I get the logo and then it goes away and nothing happens. I've tried running as admin and in different compatibility modes. Any ideas? Thanks.

User avatar
Mangus
TunerPro Author
Posts: 1829
Joined: Wed Mar 19, 2003 1:49 pm

Re: tunerpro wont open

Post by Mangus »

Although it's installed with the TunerPro installer, some systems might fail this step, so you should try installing the Visual Studio 2017 redistributable manually. Here's the link:

https://support.microsoft.com/en-us/hel ... -downloads

If you're running a 32-bit OS (your Windows XP build is likely 32-bit) then install the x86 version. If you're running a 64-bit OS (a Windows 10 installation is likely 64-bit), then run the x64 installer.

-Mark
***************************************
TunerPro Author
1989 Trans Am

Post Reply