DSM bins and definition files

Discuss DSM (Mitsubishi) definitions here

Moderators: robertisaar, dex

Post Reply
Scott Macpherson
Posts: 4
Joined: Wed Dec 27, 2006 8:47 am

DSM bins and definition files

Post by Scott Macpherson » Wed Dec 27, 2006 9:02 am

Thought I would post this link here, it has the most information I have found on using Tunerpro and the Ostrich in a DSM.

http://www.labattz.com/phpBB2/viewtopic ... t=tunerpro

Scott Macpherson
Posts: 4
Joined: Wed Dec 27, 2006 8:47 am

Post by Scott Macpherson » Wed Dec 27, 2006 10:06 am

Another thing I found is that even though the bins and ecu files listed are from the same guy, you have to hit ctrl+f2 and change the offset of the xdf header to 8000 in order for things to come up right.

ecustation

Post by ecustation » Wed Jan 03, 2007 6:08 am

Hi Happy New Year To All

can you help me for the Lance 4G93 DXF file? can sand for me TQ

Ravenous
Posts: 2
Joined: Tue Dec 04, 2007 2:20 pm

Post by Ravenous » Sun Dec 23, 2007 10:55 am

Well the link is dead I would recommend checking out http://autos.groups.yahoo.com/group/dsm-ecu/ for info on the E931 bin and how to code for it.

turboawdfanatic
Posts: 7
Joined: Wed Feb 20, 2008 3:48 pm

Post by turboawdfanatic » Wed Feb 20, 2008 3:54 pm

I've noticed the original link in this thread to labattz.com is down, but I tracked down the forum at a new URL. I believe this updated link takes you to the correct forum thread:

http://www.westcoastdsm.ca/bcdsm/index. ... 843.0.html

Post Reply