Win10 tunerproRT no ad connection

Discuss anything TunerPro related.

Moderators: Mangus, robertisaar, dex

Post Reply
Tinker
Posts: 3
Joined: Thu Aug 05, 2021 3:58 am

Win10 tunerproRT no ad connection

Post by Tinker »

Ok so win10 tunerproRT have had test bench running with delco 082 and $12p V6 3800 buick .Had system working and DA logging everything as it should be . But after trying to emulate CAS and failing no more DA connecting . I didnt have any smoke nothing like that but seem odd that DA connection doesnt work after trying CAS interface. I dont know if my laptop is damaged or its a autoprom or a tunerpro issue. Uploading bin an reading bin seem to work ok. Not sure what to do . Any ideas

Tinker
Posts: 3
Joined: Thu Aug 05, 2021 3:58 am

Re: Win10 tunerproRT no ad connection

Post by Tinker »

OK, So what i have found is that i can't have my arduino UNO installed (atmeg drivers) and my tunerpro/autoprom ftdi drivers at the same time. After removing the uno drivers and ide my data logging with tunerpro works as it should .

This is a pain because i need to use both on the same laptop. Has anyone else had this problem and what was the fix ?

Tinker
Posts: 3
Joined: Thu Aug 05, 2021 3:58 am

Re: Win10 tunerproRT no ad connection

Post by Tinker »

Now i cant get d/a logging at all . have tried reinstalling tunerpro and usb drivers still no luck. Im out of ideas..... :cry:

Post Reply